There are many kinds of advertising signs, such as acrylic, PVC, two-color board, imitation mahogany, imitation marble advertising signs produced by the company, although the materials are different, there is no difference in the setting of the advertising engraving machine, the quality of the production quality It is often expressed in the processing technology of the late engraving. Based on the focus of the peers, we will introduce the introduction of this series for the design of advertising, advertising, and crafts, taking the imitation mahogany and imitation marble advertising signs produced by Chengdu Shencai Sign Factory as an example. References for the art industry, hotel supplies industry, decoration and decoration industry
Color filling process
The imitation mahogany and imitation marble advertising sign products produced by the gods signboard are made of high-density fiberboard as the base material. Through the blanking molding, the latest surface treatment technology of Japan is used to produce the natural texture with natural mahogany and marble, which has a strong visual impact. New advertising signs for effects. The product has easy carving, easy coloring and excellent adhesion. The product has been surface treated. Therefore, it is not necessary to process the surface after the coloring of the engraved parts in the later stage, so the operation is simple, the processing cost is low, and there is no Deformation, no odor, good moisture resistance and so on. However, since the material is fiberboard after all, it is not easy to paint the acrylic material, so the novice often feels difficult.
One of the tricks: the engraving setting selects the three-dimensional engraving (someone: two-dimensional semi-engraving) scheme as much as possible, and selects the 90-degree cone knife for engraving, which visually weakens the rough feeling on the engraved surface of the fiber sheet.
Tip 2: When engraving, do not appear layered engraving, set to the best depth at one time, can be achieved by changing the tool. This is because the layered engraving will have a stack of marks, which affects the smoothness of the paint on the engraved parts.
Tip 3: Since the surface of the workpiece is affixed with a sticky note before engraving, you can operate with confidence when filling. Directly use the brush to fill the color, save paint, save labor, the effect is not bad.
Tip 4: When using self-painting to fill the color, spray the paint on the paper cup for 15 minutes, then fill it with a brush. Otherwise, the highly corrosive thinner from the paint will damage the paint surface of the workpiece.
There are many kinds of advertising signs, such as acrylic, PVC, two-color board, imitation mahogany, imitation marble advertising signs produced by the company, although the materials are different, there is no difference in the setting of the advertising engraving machine, the quality of the production quality It is often expressed in the processing technology of the late engraving. Based on the focus of the peers, we will introduce the introduction of this series for the design of advertising, advertising, and crafts, taking the imitation mahogany and imitation marble advertising signs produced by Chengdu Shencai Sign Factory as an example. References for the art industry, hotel supplies industry, decoration and decoration industry
The imitation mahogany and imitation marble advertising sign products produced by the gods signboard are made of high-density fiberboard as the base material. Through the blanking molding, the latest surface treatment technology of Japan is used to produce the natural texture with natural mahogany and marble, which has a strong visual impact. New advertising signs for effects. The product has easy carving, easy coloring and excellent adhesion. The product has been surface treated. Therefore, it is not necessary to process the surface after the coloring of the engraved parts in the later stage, so the operation is simple, the processing cost is low, and there is no Deformation, no odor, good moisture resistance and so on. However, since the material is fiberboard after all, it is not easy to paint the acrylic material, so the novice often feels difficult.
One of the tricks: the engraving setting selects the three-dimensional engraving (someone: two-dimensional semi-engraving) scheme as much as possible, and selects the 90-degree cone knife for engraving, which visually weakens the roughness of the engraving surface of the fiber sheet.
Tip 2: When engraving, do not appear layered engraving, set to the best depth at one time, can be achieved by changing the tool. This is because the layered engraving will have a stack of marks, which affects the smoothness of the paint on the engraved parts.
Tip 3: Since the surface of the workpiece is affixed with a sticky note before engraving, you can operate with confidence when filling. Directly use the brush to fill the color, save paint, save labor, the effect is not bad.
Tip 4: When using self-painting to fill the color, spray the paint on the paper cup for 15 minutes, then fill it with a brush. Otherwise, the highly corrosive thinner from the paint will damage the paint surface of the workpiece.
Portable Baby Booster Seat,Baby Feeding Chair,Portable Baby Chair,Kids Study Chair