LTI sticker printing companies in California, USA will begin busy with a new attempt. It is to print 10 different colored stickers on the same roll of paper. This printing made it easy for LTI to reach the FTA2000 “Excellent American Sticker Association 2000†Excellent Sticker Award.
The most important aspect of such imprints is "in the balance of shades. According to the vice president of the company, Dafu Banks's statement is to print the job in 2 hours and a half. The printing sequence is to use yellow → magenta → green → LTI's printing team said that the printing is based on water-based printing ink and UV glazing, and 10 different designs were made on the same printing plate, and 200-line dots were used to make vertical 5 It prints in two rows.
The emphasis of this type of printing method is to pay attention to the comprehensive color balance of 10 patterns. Therefore, Banksson stressed that color separation is extremely important, because it is a collection of different packaging patterns on each sticker. "We have made a lot of color corrections to meet the standards of our customers."
It is a simple four-primary printing, but overprinting is extremely important. If it is overprinted, it will be obvious. There is a pattern that cannot be exceeded in any color. It is very important that the four-color alignment does not exceed the white border. Therefore, overprinting alignment becomes extremely important because any overprinting is not allowed, such as magenta or cyan, which will spread to white areas.
In the drawings, some stickers are already printed with flexo, while others are not, especially the flexographic prints attached to the bottles and printed on the carton are more difficult to reproduce because the results of competing performance make the brightness even more apparent. Difficulties, especially the bottle of blue "futeja wine.
According to Dave Miller, general manager of The Arts Company, when designing 10 patterns, the focus was on a bottle of gold copper plated on the surface. "We used a very Thick aluminum foil and paste the cardboard to make it look deeper and more prominent.
Its purpose is to make it look really like a copper plate. This pattern uses golden flexo ink in one of three different printing operations.
Ball Art Design Inc. is a printing/design company that is engaged in making beverage packaging look more valuable. Now they also use this design as the cover of their own company catalog and distribute it in major exhibitions.
Although each catalogue has the same content, but these ten different stickers are affixed to the front cover or the cover, all the products in all 10 stickers are all made by the package art design company.
Although it is a lot of brand packaging products contained in a sticker, Miller said "how to not make these stickers look confused together is very important, so as to be recognized different brand names. Its purpose is to make our Potential customers know how carefully we are embarrassed.
Bankersen believes that high-level printing presses can maintain a stable printing effect. "We only print with the usual general-purpose job just to pay more attention to tone correction."
This idea is mainly derived from how to display the highest quality of flexo printing. "We attach great importance to the highest level of flexographic printing, and Miller agrees that Baltimore has indeed fulfilled its mission.
Miller emphasized that "everyone likes it very much and rarely sees the company catalog so beautifully. These stickers make them feel very proud.
Long Chen Printing <Translated from US Flexo Monthly, August 2000>