The labeling machine mainly includes: self-adhesive labeling machine, sleeve labeling machine, round bottle labeling machine, beer labeling machine, semi-automatic labeling machine, labeling machine, automatic labeling machine, automatic labeling machine, labeling machine , Automatic labeling machine, hot melt adhesive labeling machine. These products can be used for flat surface sticking, single-sided or multi-sided sticking of packaging materials, cylindrical surface sticking, partial or full-coverage cylindrical sticking, sticking in depressions and corners, etc. If you want a longer labeling machine life, then we To take good care of the labeling machine, we must first pay attention to its maintenance.
The center of the brush is aligned with the label and symmetrical on both sides. The marking brush is perpendicular to the surface of the container. The overlapping gap of the pressure brush sweeping the container is: a single pressure brush is 10 mm to 15 mm, and a combined pressure brush is 5 mm to 10 mm. The position of the cleaning brush from the sponge is 1 mm to 2 mm. Adjustment of bottle head. The bottle head of vertical labeling machine should be 20mm lower when there is no bottle than when there is a bottle.
The center line of the label box, the central axis of the labeling station is tangent to the label paper, and the central axis of the label board is in a line. The gap between the marking paper and the pressure bar on both sides should be between 0.8mm and 1mm. If the gap is too large, the marking paper will be shifted in the marking box, and the slanted mark will appear. If the gap is too small, it will cause poor push. Adjusting the position of the labeling box's grabbing hook: the upper, lower, and left grabbing hooks are on the same vertical plane and work evenly on the label paper, then the label can be grasped smoothly. Adjustment of label supply roller: When there is no label, the label pressure plate can be pressed to
Adjustment of rubber scraper and rubber roller: There should be no gap between rubber scraper and rubber roller in the whole length. If there is a gap, the rubber scraper can be adjusted by adjusting the eccentric bolt. Adjustment of rubber roller and target board: The target board and the rubber roller are only in contact with each other without any pressure. If the gap is too large, too much glue will be applied on the target board, which will cause the glue to be thrown away. The gap is too small, the contact is too tight, the glue will be squeezed away, there is no glue on the half of the target. Practice has proved that the gap between the target plate and the rubber roller is between 0.1mm and 0.2mm. It can be achieved by adjusting the bearing seat at the lower part of the rubber roller, and adjusting the bearing at the upper part of the rubber roller if necessary.
When adjusting the inlet and outlet star wheels and the inlet screw, the pressure head of the marking machine shall prevail. First adjust the bottle feed star wheel. When the bottle pressing head just overwhelms the bottle, adjust the bottle feed star wheel so that the bottle is located in the horizontal labeling machine in the middle of the star wheel groove. Adjustment of the screw rod for bottle feeding: The bottle feeding star wheel shall prevail. When the bottle is in the middle of the groove of the bottle feeding star wheel, adjust the screw rod so that the screw rod feeding side is close to the bottle without displacement. Adjustment of the star wheel of the bottle: when the bottle pressing head has just been raised, adjust the star wheel so that the bottle is in the middle of the groove of the star wheel.
A good night's sleep leaves you feeling refreshed and ready to take on the world, and having the right bed is the first step in creating a harmonious space. Choose a standard queen for the guest room, space-saving bunk beds for your child's room, or a luxuriously roomy cal-king for the master.We love designing with bed, and are so happy our clients are on board with it, too! The four-poster bed is a statement piece and adds a WOW factor in the bedroom and definitely gives off a glamorous side to the room without being too overly feminine; it still has a bit of an edge. Also, it is not very typical to find one in your standard master bedroom, so people are liking to be a little different and welcome this timeless trend back in their bedrooms!
Bedroom Beds,Kids Beds,Children Beds,Bunk Beds
HOPE IKEA , https://www.skywardrobes.com