Climbing climbing skills [Photos]

Technical climbing is a sport that is often forced to stop. The tense, sweaty leader is always followed by a shivering protector, who may remain relatively still for an hour. If you are not careful, it is easy to get wet and cold – and this is the prelude to a stiff body. The trick to keep your body warm is to choose a streamlined and reasonable outfit for climbing. This kind of clothing will also play a role in your protection.

Some people think that adding a layer of insulation inside a jacket can keep the body's necessary body temperature. However, this proposal requires that we often wear and drop during the climbing process, and frequently adjust the seat belts, wasting a lot of time. And you have to wear big tops and trousers to accommodate several pieces of clothing with isolation features, which can make you bloated and heavy. So try the following dress advice.

Climbing clothing. A dry, warm climbing outfit must first be light and flexible. Depending on the circumstances, this garment should be worn directly outside the underwear for a long time (brands include Schoeller Dryskin and Polartec Powershield). This streamlined equipment will keep you warm and not too hot while you move. We know that if it is too hot, your muscles will become sour and weak. (Remember, a cold environment will make muscle more effective). If your climbing clothing does not distribute moisture well, it must be replaced. Your body will not have the ability to cool itself, but you can adjust your physical condition with the zipper opening of the garment.

Do not wear a waterproof jacket. If the weather is really cold and you need to add some clothes outside your climbing clothing, make sure it has better breathability than the windbreaker, which can be very good to eliminate the moisture in your clothes. Unless it rains, try not to wear a waterproof jacket, it will limit the distribution of moisture in your clothes. You can choose the jacket of a slightly segregated microfiber fabric that is warm, windproof and has good breathability.

Similarly, you don't want sweat to soak your trousers, even though the legs produce less heat. Try to avoid wearing waterproof pants.

Protective clothing. Do not save in this area. When doing protection, cover your climbing outfit with a thick coat. If necessary, put a coat on the outside of your pants. The trousers are preferably zippered on both sides of the trousers and are easy to wear. The moisture that you produce when you exercise can be discharged outside the garment. Therefore, the best protective clothing is synthetic fiber instead of down, because once down, the feather will lose its value of insulation and insulation. Protecting clothing will inevitably get wet by your body's moisture. It doesn't matter. You can dry it while you're on a break, or put it in a sleeping bag to dry it at night.

The sky was dim, and the hurricane whistled across the horizon, and you lost your way. You have been in the wilderness for a long time. What's more unfortunate is that you forget about your warm and comfortable tent.

What should we do now? Instead of waiting for it, it is better to build a small "palace" for yourself quickly. And this only needs to be easy to carry a snow shovel and a snow saw. Building a sledge will ensure your safety and allow you to sleep peacefully and peacefully through a cold, snowy night.

location. Try to find a solid snow layer that can be cut into snow bricks. It's best to look for a place that has been blown by wind, where there is no snow cover, or clear the snow to find a more solid layer of snow. If on the hillside, the first thing to do is clear out a platform.

floor. Use your saw to draw a rough outline of the floor on the snow floor. The length of the sled is arranged parallel to the wind direction, while the sled's door is located in the lower air outlet. The single room (single for one person only) needs the same width as the shoulder, 2.5-3 meters in length. Of course, you can also build a large snow slug that accommodates more people depending on the situation. Then use a saw to draw the approximate shape of the snow bricks on the outline of the floor. The snow blocks will be used to build the A-shaped roof later. The snow bricks are sawed according to the contour of the floor. The thickness of the snow bricks is determined according to the condition of the snow layer. If the snow is loose, the thickness needs at least 30 cm. The snow bricks used to block the doors should be larger than ordinary snow bricks, about 10 centimeters on each side.

put up. According to the outline drawn in advance, cutting with a snow saw. The same line is cut twice and the distance between the two cuts is 2-3 cm, so that the snow bricks can be easily moved. In front of the ferret, an import platform with a diameter of about 1 meter was excavated so that after the snow bricks were sawed with a snow saw, the snow bricks could be pushed out completely and completely. If you accidentally break the bricks, see them from other locations.

roof. If you want to build a bigger "house", you have to dig a bigger import platform in front of the snow rake. Then, on both sides of the ferret, small eaves were carved to house the snow bricks and pile up the roof. In order to make the snow bricks harmoniously stacked into an A-shape, carefully cut one side of the snow brick into 45 degrees, as shown in Figure 3. Starting from the windward side, stagger the snow bricks to form the roof. It will make the ferret stronger. Keep on doing this. Finally, you will have a big snow brick left over to use it as a door to block the entrance.

Finished. Take some time to get the snow bricks together and finally cover the roof with a layer of loose snow to make the roof more smooth and perfect. Vents are a must, especially if you want to use a stove inside.

Climber Network Authorized Outdoor Information Network

Flexible Vacuum Packaging, which has a good sealing performance and get the strengths of moisture-proof, anti-mildew, anti-pollution, anti-oxidation, save volume, save freight, extended storage period, are used to evacuate the air around perishable goods such as coffee, tea, chocolate, candy, seafood, noodles, rice, snack, frozen food, fast food, etc. Especially for the drug industry, vacuum packaging is very common. Lanker provides vacuum packaging solutions for clients from all over the world. We look forward to cooperate with you!

Vacuum Packaging Bags

Vacuum Packaging Bags,Meat Vacuum Seal Bags,Vacuum Bags For Sea Food,Vacuum Sealer Bags For Grains

Lanker Pack Group Limited , http://www.lankerpouch.com