When a computer fails, we often think that if the system fails, it will re-do the system. There are many ways to reinstall a system. The most common and most traditional method is to reinstall the system with a CD. However, with the development of mobile storage in recent years, more people now use the U disk method to reinstall the system. However, reloading with a disc is still a must-have skill and can be used in many places. So, how to install the system with optical drive? Let me introduce you to the following!
How to use the optical drive to install the system is as follows:
    To install a system with an optical drive, you need to have two basic hardware, one is the system CD and the other is the CD-ROM drive. These two things are indispensable. So, first of all, you have to have a system CD, and an optical drive. And now there are a lot of laptops that don't have an optical drive, so if your computer is not equipped with an optical drive, you can't install the system with a CD-ROM.
    First, open the CD-ROM drive on the computer case, just press the open button above, open it, put the disc, and then close the CD-ROM drive. At this point the computer will automatically restart.
    Before the computer restarts, you must first enter bios, and then set the way to boot. That is, we have to boot the system from the CD to install the system. The way to enter bios, different computers have different ways, the general way is to press the delete button on the computer keyboard. Of course, there are a lot of ways to enter the bios in the motherboard. There are pressing the esc key to press F12, etc. How to enter the bios in your computer, you need to refer to the manual or try it. Be careful to keep pressing before you turn it on.
    After entering bios, you need to select the startup item. If you are not familiar with English, you can find a word like boot. As long as the option of this word appears, you generally choose the startup item. Find this option, and then look for the first boot option, which is the device that is started first. After you find it, choose an option such as CD-ROM. This is the CD-ROM drive. If we want to boot from the CD, we have to choose this option.
    Once set, we also need to save the bios settings, press the F10 key on the keyboard, a confirmation dialog will appear. Click ok and the system will restart again.
    6 When the system restarts again, it will enter from the CD. At this time, if your system disk works, a system installation interface will appear. Just click on the Start installation button and you can start to install the operating system. The whole process is fully automatic and does not require any manual operation, so you just have to look at it. This step will not be described again.
    Through the above introduction, do you know how to install the system with optical drive? Those who don't know the computer can use the above steps to install the system themselves!
Clamp, C Clamp, Table Clamp, Desk Clamp, Microphone Clamp, Office Partition Clamp, Glazing Desk Clamp, Desk Screen Clamp, Monitor Arm Clamp, Pipe Clamp, Tube Clamp
MGX Metalworks Co., Ltd. , https://www.metalmgx.com