[China Packaging Network News] Universal Rally machine maintenance to pay attention to the five major issues, when using Universal Rally, pay attention to do a good job of maintenance and repair, and then tell you that the universal Rally machine should pay attention to the five major issues of use and maintenance.
1, cleaning and cleaning:
1) Some dust will inevitably be produced during the test
2) Not only will the surface of some parts wear, scratch, etc.
3) If these dusts enter the electro-hydraulic servo tester' target=_blank> Universal Tester Hydraulic System
4) Clogged valve hole
5) Be sure to keep the testing machine clean;
2, hydraulic oil:
1) The level of the tank must always be checked and replenished in time
2) Change oil every 2000 to 4000 hours
3) However, the most important thing is that the oil temperature must not exceed 70 °C. 4) When the oil temperature exceeds 60 °C, the cooling system must be turned on;
3, filter:
1) Generally need to be replaced once every 6 months
2) For the filter with clogging indicator, it should be constantly monitored. When the indicator alarm, it must be replaced immediately;
4, regular inspections of components:
1) Pressure control valve
2) Flow control valve
3) Pump regulator
4) Pressure relay
5) Travel switch
6) Signal devices such as thermal relays
7) Cooler
8) Scale cleaning with air-cooled coolers should be cleaned regularly
9) The use of water-cooled should be regularly observed cooling copper pipe leaking phenomenon;
5, other checks
1) Increase vigilance and pay close attention to details
2) Early detection of accidents
3) Prevent accidents that cause major accidents
4) Pay attention to leaks
5) Pay attention to pollutants
6) Note that the components are damaged.
Universal Rally machine maintenance to pay attention to the five major issues, through the above detailed introduction, the user has a certain understanding of this problem, and in the next use and maintenance should pay attention to the above five major issues!
