The blasted glass includes sprayed glass and sand-carved glass, which is a glass product processed into a horizontal or intaglio pattern on the glass by an automatic horizontal blasting machine or a vertical blasting machine. Color printing glass color printing glass is the product of photography, printing and copying technology applied on glass. Another method of cutting is to use a 4mm × 50mm ruler, and the glass knife is cut close to the ruler. Therefore, luck is at ease, and the blowing power is just right to ensure the size of the product. Generally it is not possible to bake; if it is a heat curing ink. Knock out the cracks that run through both sides. Put in water.
Try shaking the drill. It can be used with a thin wire. Auxiliary fixture: The fixture is made according to the drilling position and the diameter of the hole. The diameter of the hole in the middle of the fixture is 1 - 2 mm larger than the diameter of the drill. The thickness of the plate is 2-3 mm. Anodizing equipment line body: manual line, semi-automatic line, fully automatic line, selected by product weight, length and output. Some friends who are concerned about the glass industry may often hear people mention glass tea sets. According to the needs of indoor chroma, the use of stained glass can blend painting, color and light into one. It is characterized by pure imaging, high reflectivity, good color reproduction, bright and natural image, and durable even in humid environments. Art glass hand-blown techniques should be evenly distributed. The uniform distribution of hot glass in each part depends mainly on whether the rotating speed of the blown iron pipe is proper. If the rotating speed is too fast or too slow, the thickness of the product will be uneven. The glazed tempered glass glazed tempered glass is printed on the surface of the glass by a special process, and then dried and tempered. The color grading can be completed in a short time. Related concepts Etching etching, also known as photochemical etching, is a technique for removing materials by chemical reaction or physical impact, and can be classified into wet etching and dry etching. (dry etching) two types. It is directly inked on the glass with special pigments, or it is sprayed into various patterns on the glass and added with color. It can be vividly reproduced on the original painting, and the film has strong adhesion and can be scrubbed. What are the advanced types of glass materials? The advanced silver mirror glass is made of modern advanced mirror technology. The special float glass is selected as the original film. It is made by a series of processes such as sensitization, silver plating, copper plating and protective paint. of. The magnetron sputtering coating vacuum chamber has a number of connecting valves for connecting various auxiliary pumps. The shape of the machine varies from substrate to substrate, but generally includes the substrate input portion, the printed portion, the ink-fixed portion, and the substrate-collecting portion. Stained glass stained glass is a wide range of high-grade glass varieties. Original taste: Due to the characteristics of the pores of the glass, it does not absorb the taste of the flower tea, so that you can taste 100% of the original taste, and it is easy to clean and the taste does not remain. High transparency: Fully transparent glass material, which can directly see through the brewing process and enjoy the beauty of tea/flower/fruit. In addition to the car, the phone case is also painted to make a gradient. A bowl of cold water is also required for drilling. The concept of infeed is to move the workpiece toward the tool or the tool to move toward the workpiece. Therefore, the operation of the cutting machine is required to be simple, easy to understand, safe and stable. The optimization should be applied to its actual situation. Put kerosene. How to open a round hole in the window glass first. The viscosity of the upper glass liquid is different from the viscosity of the glass near the bottom of the crucible. Pay special attention when picking up the material. Curved screen printing machine. The colored glaze is sintered on the surface of the glass, which has the advantages of acid and alkali resistance, corrosion resistance, never fading, safety and high strength, and has the characteristics of reflection and non-perspective. (For example, some optical instruments) are usually stuck on a special grinding machine with copper tubing. Hold the glass scratches on the edge of the countertop and apply a force. Lubrication performance, cooling performance, rust resistance, cleaning performance - four can be integrated. A number of staggered tool marks are randomly cut in the horizontal and vertical directions in the disc.
Article source address: http://
Glass Vase,Crystal Vase,Clear Vase,Tall Glass Vase
Xi'an ATO International Co., Ltd , https://www.xianato.com