Three steps to teach you to move the constant temperature and humidity chamber correctly
The movement of the constant temperature and humidity chamber will be relocated with the expansion of the enterprise scale. The equipment is not free to move when moving. It is also necessary to pay attention to the implementation of the following three steps. Only when the standard is correctly implemented will the potential problems of the equipment be reduced.
In the first step, the test box should avoid excessive tilt during the transfer process. The maximum tilt angle should not exceed 30°. The refrigeration principle is the same as that of the refrigerator. The refrigeration oil and the ambient refrigerant in the compressor will over-tilt and will cause compression. Machine damage, this is an industry taboo, we must be careful;
In the second step, the test box must be packaged with flexible materials such as foam or sponge during transportation to avoid damage to the appearance. The casters need to be fixed. After reaching the new laboratory, do not use it immediately because the test chamber is in the process of transporting refrigerant. And the frozen oil is vibrated, it takes a certain time to recover, and it can be placed horizontally for 12 hours;
In the third step, after the test box reaches the new test room, the power is turned on and the switch is turned on. Sometimes the device does not light up. This is because the test box is equipped with a phase sequence protection switch, and only need to put any of the three fire lines. The two can be exchanged for the wiring position.
The constant temperature and humidity chamber is suitable for investigating the adaptability test of electrical and electronic products, components, parts and materials, their moisture resistance under different temperature and humidity conditions, storage, transportation and use under high and low temperature environment.
Product details
About Greener Walker
We are Greener Walker,we tried a variety of ways to protect the environment and finally we find it,the compostable and biodegradable bags.But this way is very very very slow and we just like a walker,but the pollution is a runner.So We need more walkers,we need you!
Love Pets Love Earth
For everyone who loves pets,pets are their family.Therefore,for pets and others,we should minimize the impact on the environment and others when we walking the dog.
Box Contains:
15 Bags/roll and 36 Rolls,totally 540 Bags
Bag's Size:23cm x 33cm(9in x 13in)
NOTICE:
Please store these bags in a cool,dark,dry place and keep them out of sunlight and away from sources of heat or steam.Use all bags within 18 months of purchase,otherwise they will start to degrade over time.
Keep Your Hands Safe:Our poo bags are 100% leak-proof and extra thick,never worry about your hands when you pick the poo up.
Super Value Package:36 rolls and 15 bags per roll,total 540 bags can supply up to 7 months.
About Measures:Bag's size 13x9 inches (LxW),fits all size of dogs and each roll fits standard-size leash dispensers.
Main Material:Unlike other poo bags, ours are made with corn starch blend which more friendly to environment.
Earth Friendly:We use recycled materials in our packaging and roll cores because details matter.
Flat Bags With Epi,Biodegradable Pet Waste Bags,Biodegradable Dog Poop Bags,Biodedradable Doggie Poop Bags
Taizhou Jinchi Sanitary Product Co., Ltd , https://www.petwastebagtzjc.com