Bathroom decoration has always been the focus of attention during the home improvement process. There are many precautions in the bathroom decoration. The choice of bathroom tile color is very important. Choosing the right bathroom tile color matching can make the whole bathroom have a special effect. At present, the variety of ceramic tiles on the market is dazzling, and it is dazzling. As the highlight of the decoration purchase, the choice of tiles is a university question.
Bathroom tile selection needs to be cautious
1, choose the low water absorption rate of the tile
In general, high quality tiles have a low water absorption rate so they can dry quickly. If the tile does not indicate the water absorption rate, you can use tea or water droplets on the back of the tile. After a few minutes, the degree of diffusion of the water droplets is observed. The less water is absorbed, the lower the water absorption rate and the better the quality. Tiles with high water absorption rate will cause cracks on the surface of the tile and peeling off the entire wall and floor tiles after the thermal expansion and contraction. It is necessary to pay attention to this problem when decorating the bathroom in the northern part of the four seasons.
2, choose the high density of ceramic tile
When purchasing tiles, you can see from the side whether the brick surface is flat and whether there are pinholes with uneven thickness. At the same time, the tile can be tapped to hear whether the sound is crisp and the sound is more brittle, indicating that the tile has a high density and a good hardness. Such tiles are laid into the bathroom space, which is neither easy to damage nor easy to maintain and clean.
3, the humidity is large now advocates to plaster the wall
This is not only for the sake of beauty, but also to resist the erosion of moisture and protect the waterproof layer of the wall.
4, the floor tiles use anti-slip texture
When we go to buy, the most recommended by the merchants is the matte surface or the light and convex shape of the floor tiles. The reason is very simple: non-slip. In the decoration, the general decoration team will do, if not done, you can supervise, the floor of the bathroom should be 10~20 mm below the floor of other rooms. When laying tiles, consider the location and size of the floor drain. Otherwise, there will be gaps, and the laying of the bricks usually retains 1% of the leakage slope, and the floor drain is the lowest to facilitate drainage.
5, distinguish dry and wet areas with different colors
If your home chooses dry and wet decoration: the separation of the shower area from the toilet and the basin (wash basin decoration renderings). You can achieve a good division through different tile materials and color varieties, so that the two do not interfere with each other, to avoid the splash of water in the past, after the bath, wipe the East. This is a relatively common decoration method in foreign countries.
Summary: In simple terms, the bathroom usually has a relatively high humidity, and the requirements for the tile are waterproof, slip resistant, and abrasion resistant. The bathroom floor tiles are generally made of whole body bricks, which have good non-slip wear resistance; the bathroom wall tiles are usually made of glazed tiles, and the glazed tiles are rich in glazed color patterns and have strong anti-pollution ability.
Clutch,Clutch Bags For Women,Evening Bags,Ladies Clutch Bag
NINGBO SUREWAY E-FASHION IMPORT AND EXPORT CO,.LTD , https://www.surewaybags.com