The Marken 9840 contact ink coder is driven by a DC motor and can be used in continuous and intermittent packaging coders. The compact 9840 can be flexibly mounted on most continuous or intermittent vertical or horizontal packaging machines. The 9840 is designed for printing dates and batches on packaging films or labels. The printable area can reach 38,1 mm x 47,7 mm (1.5" x 1.88") and print speeds up to 400 packs/minute. That is, when the dry ink reaches the speed of up to 102 m/min, it can still dry immediately when the package is touched. The 9840 is designed to meet European and North American safety standards
Unique mounting brackets make matching easier. Marken's mounting brackets make the 9840 easy to install and do not require expensive, sophisticated mounting hardware. The bracket allows you to easily set the print position. The bracket can also help you minimize the need to change the orientation of the packaging film and also make it easier for the packaging film to pass through. The 9800 series coder is the third-generation ink coder with a global installed capacity of more than 40,000. .
With minimal downtime, the 9840 coder does not require routine maintenance. The design is based on 24 hours a day, 7 days a week.
The cost of printing is low and the cost per line is only US$0.02 per thousand. Nothing to miss, the print direction is easy to change. No ribbons, no ribbon breaks. The replacement of fonts and ink wheels takes only a few seconds. Provides two types of fonts for axial and radial printing.
Easy to install, set up and operate. Quick mounting brackets simplify the installation process without the need for complicated setup procedures. Once installed, just replace the ink wheel and the pellets. The 9840 coder does not require any power from the main packaging machine (chains, belts, gears)
Easy to repair and service. System status and diagnostic information are displayed on the LCD window, making it easy to continuously monitor and diagnose problems. Easy to connect to control box and all system components. The microcomputer control system has many diagnostic functions.
The 9840 coder has clear, easy-to-read, dry prints on most common paper materials and packaging materials. The replacement of characters and ink wheels takes only a few seconds without tools and it is not as dirty as a wet ink wheel and needs cleaning. That is, dry ink is a hot melt mixture. At room temperature, the ink wheel is hard and dry, and it is very clean. They will not splatter and make a mess. That is, dry ink is non-toxic and solvent-free. Simple and reliable, your Markon ink coder can help you print thousands of products without any problems while saving your maintenance costs.
Source: MARKEN