Considering the value of solid wood composite doors can not ignore the six elements
The solid wood composite door has various shapes, rich styles, or exquisite European-style carvings, or Chinese classical color mosaics, or fashionable modern, different decorative style doors give consumers a wide selection of space, high-grade solid wood composite doors not only have a smooth feel The color is soft and the characteristics are very environmentally friendly and durable. Deeply sought after by consumers, solid wood composite door manufacturers and distributors often use words such as “not easy to deformâ€, “beautiful†and “environmental protection†when recommending products for customers. However, how a composite door product is "good quality", how "beautiful" and how "environmental", companies and distributors can not give customers a clear concept. The author believes that considering the value of solid wood composite doors, six elements cannot be ignored.
One: materials
Because of its internal composite material, the solid wood composite door is a five-layer symmetric misaligned laminated composite material with stable wood properties, which can effectively avoid the occurrence of cracking and deformation. However, solid wood composite doors are also prone to breakage, especially when the thickness of the veneer attached to the surface is thinner. For example, the surface of solid wood composite doors produced by some manufacturers uses ordinary 0.3mm veneer, which is easy to break because of its thin thickness; if imported wood chips with a thickness of 0.6mm are relatively good. At the same time, if the thickness of the solid wood veneer is too thin, it will easily cause the phenomenon of penetration and penetration, which will affect the appearance and quality of the solid wood composite door.
Second: environmental protection
Whether the material selection meets the national environmental protection standards, the main control indicators are the formaldehyde emission and oil of MDF and multi-layer board.
The amount of toluene released from the paint. According to national regulations, the amount of formaldehyde released from MDF and multi-layer boards used for product appearance shall comply with E1 environmental protection standards. The E1 environmental standard is a popular environmental standard in Europe. This standard specifies that products with a formaldehyde emission of less than 2.0 mg/L are qualified products. Paint materials used for product coating must also comply with national environmental standards. Currently, the toluene content standard for paint materials is less than 1.5 mg/L.
Third: the process
Cold pressing process: The cold pressing process of solid wood composite door can avoid the internal stress increase and water content change of the material, and effectively ensure the stability of the product.
Engraving process: Hand carving is better than machine engraving. The hand-carved products are more realistic and collectible in terms of sight and touch. Each pattern of the product is carefully crafted by the engraver, more vivid, and not as rigid as machine carving.
Painting process: When assessing the quality of solid wood composite doors, paint is one of the factors that must be considered. It directly affects the texture, feel, environmental protection, durability, and resistance to yellowing of solid wood composite doors. At present, the paint used for solid wood composite doors on the market is generally polyester paint and nitrocellulose paint, and a few manufacturers use PU paint. The painting process of these three kinds of paints must go through the process of color matching and three bottoms and three sides. In order to make the surface of the product more sturdy and beautiful, some companies have added curing and waxing processes to the coating. Generally speaking, if it is not intentionally hit with a sharp object, the coated product is not easily damaged, and even if it is damaged, it is easy to repair.
Its four: color
Because the solid wood composite door belongs to the functional accessories of the living room of the living room, in general, the wooden door is relatively associated with the furniture, the wall paint and the window cover dumb in the home, and the association with the floor is relatively small, with furniture and ground. The hue should be similar, and the contrast with the color of the wall is large. This will help create an atmosphere with a sense of space. Manufacturers and distributors should provide reasonable advice to customers when recommending products to customers. For example, when the customer's living room environment is warm, they can recommend warmer solid wood composite door color, such as rosewood, cherry wood, teak, Sapele and so on. When the customer's living room environment is cool, it can be recommended for the shallow solid wood composite door color, such as mixed white, white willow white.
At the same time, the color of the solid wood composite door should be similar to the color of the furniture, and it should be as consistent as possible with the window cover dumb (the current set door has a lot of matching window cover dumb, skirting board), and there should be a corresponding contrast with the wall color. .
Fifth: sound insulation
Look at the weight: the effect of sound insulation is directly related to the density of the material. In general, the higher the density of the board, the better the sound insulation. Look at the thickness: the thicker the panel, the better the sound insulation. The smoothness of the door panel: the flatter the wooden door, the better the combination with the door cover, the better the sound insulation effect will be.
Sixth: price
Due to the influence of materials, paint, labor, processing technology, corporate profits and other factors, the price of solid wood composite doors on the market is quite different. The production technology of solid wood composite doors is not complicated, so the competition between enterprises is often reflected in materials, labor, paint and so on. This situation makes the quality of solid wood composite doors on the market mixed. Therefore, under normal circumstances, the price of solid wood composite doors with better materials is relatively high, and the so-called "one penny, one share". Although I understand several factors that affect the value of solid wood composite door products, it does not mean that enterprises and dealers can easily distinguish the quality of various solid wood composite doors. The following content, the author will introduce some simple methods to evaluate the advantages and disadvantages of solid wood composite doors, to facilitate the quality of products controlled by enterprises and distributors.
1. Appearance of paint: no particles on the surface, no traces of ribs, no collapse of pits, brown eyes of veneer; the overall color is consistent; the luminosity meets the sample standard; all the corners are touched by the back of the hand, and it will feel round and no strokes. phenomenon.
2. Structural parts: Observe whether there is cracking in the corner paint of various molding lines; check whether there are gaps in the joint between the molding core board and the molding line, and whether the diagonal lines are consistent; observe whether the assembly parts of the assembled door have paint Cracking, obvious cracks in the assembly part; check whether the door leaf is bent or twisted; check whether the line shape is round and smooth, with or without convex depression; observe whether the fixed nail eye has obvious collapse phenomenon.
3. Installation acceptance: focus on checking the consistency of the door joint after installation; the anti-collision effect of the anti-collision bar after closing the door, the surface flatness of the door leaf and the integral door cover; the overall horizontal and vertical effect; the horizontal effect of the lock; the door opening or When closed, whether to automatically switch; the tightness of the door lock; the ease with which the door is opened or closed.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Mummy Bag With Insulated Pocket
Mummy Bags With Insulated Pocket are becoming more and more popular as regular items for babies and parents. Whether it is a long-distance travel or a short trip, the Mummy Bag provides important convenience for babies and parents. The popularity of mommy bags has caused new parents to pay attention to infant travel, not only psychologically but also physical changes, with great significance.
Mummy Diaper Backpack,Insulated Pocket Mummy Bag,Insulated Pocket Mummy Diaper Bag,Mummy Bag With Insulated Pocket
JOYBABIES PRODUCT CO.,LTD. , https://www.my-joybabies.com