Casio PRO TREK PRX-8000T helps you challenge 8000 meters of peak reading>>

There are only 14 peaks at an altitude of more than 8,000 meters above sea level. Let humans stand at an altitude of 8,000 meters. The challenge of the peak is not to say that only perseverance is sufficient, and determination, equipment, and technology are indispensable. The 8163m of MANASLU Manaslu is a legendary figure. It is the first mountain to be successfully reached by Asians, the mountain of the God of the Land in Sanskrit, and also the Casio PRO TREK MANASLU series. The origin of the name of PRX-8000T. The "8000" code not only represents the height of the MANASLU Manaslu, but also means that this watch can challenge you and conquer those peaks that rise above 8000 meters above sea level.

Do the tough challenge of 8000 meters

For climbers, climbing the peak may also need to deal with the confusion caused by the low-oxygen environment. At this time, to quickly read the correct time and height on the watch, the dial must be required to have a sufficiently high degree of recognition. Casio PRO TREK MANASLU series PRX-8000T deliberately made the dial 37.5mm, the dial of the 12 points made of a large scale to some exaggerated three-dimensional scale, this design advantage is that in the light even dark, still able to be strong The degree of recognition.

Hours, minutes, and scales are coated with dual light storage coatings in blue and green, allowing the dial to be clearly read even in dark or harsh environments. In addition, the second hand also uses the most recognizable orange color. This is to help the climber to confirm that the watch is still working properly under unclear conditions. This small detail also reflects PRO TREK's professionalism as a climbing gear.

The harsh alpine environment must not allow climbers to make fatal mistakes in direction, time and altitude. The details of the tough guys of the Casio PRO TREKMANASLU series PRX-8000T are reflected in the third-generation triple sensors. It is not only compared to the second. The size of the magnetic sensor is reduced by 95%, while the power consumption is only 1/10 of that before, and the pressure sensor consumes only 1/7 of the previous power. More important is that the minimum interval of height measurement is shortened from 5 seconds to 1 second, the measurement accuracy is increased from 5 meters to 1 meter, the height measurement range is -700 meters to 10,000 meters, the pressure measurement range is 260hPa to 1100hPa, and the measurement accuracy is ±3hPa; The accuracy of the position sensor is within ±10°; the temperature sensor has an error of ±2°C in the range of -10°C to 60°C. This means that the third-generation triple sensor has higher measurement accuracy and its advantages are extremely obvious.

To ensure that the bezel, crown, and buttons are durable, engineers performed DLC hardening on the CASIO PRO TREK MANASLUPRX-8000T, the sapphire glass mirrors are also more wear-resistant, and the case uses a pure titanium and resin hybrid protection structure, even though Climbers frequently hit the ice with tools and the Casio PRO TREK MANASLU PRX-8000T on the wrist still ensures effective shock protection. At the same time the second hand uses a carbon fiber material, so the advantage of this design is to reduce the weight, this piece of 59.7x52.5x14.4mm watch weight is controlled at about 140g, the opponent's wrist will not cause a burden.

In fact, the real hardship in the mountains is the difficulty of adjusting the traditional titanium strap. After adding or subtracting clothes, the strap will be difficult to fit completely. This has long been considered by engineers. The titanium TIC deep hardening adjustable strap of the Casio PRO TREK MANASLU PRX-8000T even without the help of tools It can also be easily adjusted to ensure that it is easy to wear both inside and outside the glove. The strap also adds a double locking function, and the length of the strap can be manually adjusted according to the thickness of the garment, avoiding the possibility that the watch cannot be worn after replacing the clothes and equipment. The wide-faceted titanium H-shaped bracelet also fits the wrist more easily, and the connection between the strap and the case also supports greater movement.

Set the director of everyone

It can be said that the Casio PRO TREK MANASLU series PRX-8000T is a collection of the strengths of all the watches in the CASIO PRO TREK series. In addition to the aforementioned third-generation triple sensors, the watch also has six innings to ensure the accuracy of time. , and loading solar panels to maintain longer battery life.

After two generations of development, the Casio PRO TREK MANASLU PRX-8000T finally found the most suitable compromise in the pure LCD dial and the pure dial dial. The pointer and LCD display are mixed in the value and practicality of the compromise. Gives enough space for the solar panels, and on the LCD screen, the watch can more clearly indicate the current altitude, barometric pressure and barometric pressure, compass angle and temperature. The pointers share a high degree of visibility in the case of blurred vision. The division of labor between the two is clear and they complement each other.

Wearing a glove to operate the watch will inevitably result in insensitive operation. The Casio PRO TREK MANASLUPRX-8000T uses a crown and a button that are large enough and has a non-slip design. The most frequently used altimeter button is also used. The same orange design as the second hand makes it easy to quickly identify when used, and the crown is also locked to prevent misuse and handling, to prevent misuse of the wrist caused by the misuse of unnecessary trouble.

Now Casio PRO TREK MANASLU PRX-8000T has been incorporated into the world time of -29 degrees Celsius to 60 degrees Celsius, 100 meters waterproof, fully automatic LED lighting, alarm clock, 1/100 second stopwatch, automatic calendar, 29 cities. All PRO TREK series can do this PRO TREK MANASLU PRX-8000T.

In addition, as the flagship product of Casio, all PRO TREK MANASLU PRX-8000T are manufactured in Japan and manufactured by Yamagata Plant in Japan with advanced manufacturing technology. The high-precision production conditions required for mountaineering watches can be met here, including a dust-free production environment and high-precision machinery of 1/1000 mm, ensuring that every tiny gear has been precisely assembled. With its advanced technology and craftsmanship, the CASIO PRO TREK MANASLU PRX-8000T is arguably the most trusted high quality watch.

War on nature

In the face of the harsh natural environment, only reliable technology can indicate the shortcut to the top of the mountain. From the successful summit of the Manaslu Manaslu in 1956, human technology is constantly being proven through challenges with nature. Casio PRO TREKMANASLU PRX-8000T uses all the advantages of PRO TREK more reasonable, more reasonable details of the design also makes the watch itself easy to use and reliable. After three generations of changes, Manaslu's spirit has been imprinted on the Casio PRO TREK climbing watch. It is more like a totem, worn on the climber's wrist, to witness the scenery more than 8000m.