[ Chinese wardrobe network ] With the gradual change of people's consumption consciousness, the understanding of furniture collocation is also changing day by day, people began to pursue more convenience and benefits, therefore, the number of consumers of home-made wardrobes has increased significantly, but the problem When I bought the wardrobe sliding door, I don't know if it is better to choose the concave rail or the convex rail. Some people think that the convex rail is good, and some people think that the concave rail is good, then today Xiaobian and everyone will decrypt it!
Viewpoint 1: Think that the convex rail is good
“The performance of the convex rail is obviously higher than that of the concave rail. The concave rail is easy to accumulate dust and is difficult to clean. If there is foreign matter entering, it is easy to jump. However, the convex rail is very good to avoid these situations, so the convex rail is designed. It’s better than the concave track science.â€
Viewpoint 2: Think that the concave rail is good
"Because, if a convex groove is used, the concave wheel is used on the door. Because of the frequent force, the concave wheel is more likely to widen, causing the concave groove of the concave groove to be not tightly coupled, resulting in a trick. Will shake, shorten the service life! This is the disadvantage of using the convex groove! In addition, the groove can also be installed with a positioner, which is very convenient for the consumer, because it can position the card in the best position, which can make the door stick On both sides of the mullion, otherwise there will be gaps, and it is easy to get dust in the closet!"
Sliding door wardrobe is currently the most common custom wardrobe in the home decoration, and the durability of the sliding door depends largely on the use of the slide rail. Because the sliding door is the most prone to problems, it is still on the guide rail. In the pulley part, common problems include sliding door jumps, poor sliding and so on. Therefore, many consumers are concerned about the problem of the concave or convex rail of the sliding door, which is really necessary. In order to let consumers have a clear understanding of the sliding door slides, Xiaobian integrates some materials, enters the enterprise and consumers, and answers for everyone.
First, let's take a look at the construction of the convex and concave rails of the sliding door rail.
The concave rail, as the name suggests, is the concave rail of the concave design.
The narrow groove is smaller than the average person's little finger. As it is said on the Internet, it is easy to accumulate dust and it looks bad. In addition, once the groove is deformed or defective, it is easy to cause the sliding door to be inconvenient, so it is necessary to carefully check whether the track is smooth after the construction of the worker.
Small series of tricks: According to the consumer opinion of using the concave rail sliding door wardrobe, the big things are cleaned with a vacuum cleaner or a hard bamboo sweep. The dust can be cleaned with a wet towel wrapped with chopsticks or a small bamboo stick.
Xiao Bian saw in the wardrobe store, some wardrobe brands also considered this problem, the groove of the slide rail is designed to be wider and shallower, so it will be much easier to clean, but it will also be easy to appear.
The design of the grooved slide rail corresponds to the use of the concave wheel for bearing and moving. In theory, the number of times of use is more likely that the pulley is easily worn, and the movement is not smooth or jumps.
Therefore, the material of the pulley is also very important. Currently, there are two kinds of plastic pulleys and glass fiber pulleys on the market. The plastic pulley has a hard texture, but it will be bun, hard and unable to slide for a long time; the fiberglass has good toughness, wear resistance and smooth sliding. There are also a few use of metal pulleys, which are very strong, but produce noise when in contact with the track; be sure to choose carefully. The sliding door pulley is generally required to be able to push and pull more than 60,000 times, and the brand wardrobe can reach more than 100,000 times.
The convex rail concave wheel is often designed with anti-jumping device to ensure that the sliding door is safe and does not derail when sliding. In addition, considering that the shape of the convex rail is easily deformed by the collision of hard objects, the convex rail is often solidly designed.
Xiaobian Comments: From the above analysis, Xiaobian thinks that the sliding door rails are concave or convex or convex rails have their own advantages and disadvantages. When purchasing, pay attention to the following two points:
1. When purchasing the convex rail sliding door, understand whether the convex rail is solid design, whether the positioning device can be installed on the sliding rail, whether the pulley and the sliding rail are added with the anti-jump device, what materials are used for the pulley, try not to buy The sliding door of the groove convex rail.
2. When purchasing the concave rail sliding door, test whether the sliding of the sliding door is smooth, whether the combination of the pulley and the sliding rail is tight, and the sliding door can be gently shaken when selecting. If the degree of the door shaking is smaller, the stability is more it is good. When shaking, pay attention to the upper pulley and the upper rail. The gap of the good quality sliding door is almost zero, so that there is no vibration feeling when sliding, smooth and smooth.
Stainless Steel Workbench Top,Metal Work Tables,Steel Work Tables,Trinity Stainless Steel Workbench
Xinhe Stainless Steel Products Co., Ltd. Of Pengjiang District Jiangmen City , https://www.sinkhall.com