[ Chinese wardrobe net ] The overall wardrobe, also known as the wall-mounted wardrobe / custom closet / cloakroom, etc., has become one of the must-have furniture in Europe and the United States in the 1980s. In China, although the development of the overall wardrobe is still in the initial stage, as people's living standards continue to improve, everyone's understanding of the decoration has also reached a higher level. The overall wardrobe is also becoming an indispensable part of modern home decoration. The overall wardrobe is tailor-made, and environmentally friendly, fashionable, professional and other characteristics, will be destined to become a hot spot for household wardrobes in the next few years.
The overall wardrobe production process is different from the general purchase of panel furniture. First, the designer will have a close contact and communication with the user, understand the user's hobbies and their home style, and then measure the door to design a reasonable overall wardrobe. During this period, the designer will provide a computer rendering, and after the user is satisfied, the overall wardrobe will be made from the assembly line according to the drawings.
â—†The advantages of the overall wardrobe
Space saving, the whole wardrobe can be designed according to your needs. After being put into the home, it will form the feeling that the wardrobe is recessed into the wall. Not only can the inside be cut into the hanging space, the space can be placed, the top space can also be put on the bedding, or the child can play. Greasy toy. Through the choice of the color of the wardrobe sliding door, it can be integrated with the decoration of the whole room. If your bedroom is large enough, you can also design a walk-in closet with a full wardrobe, with a stylish sliding door on the outside, and a private space is created.
Economical and practical, the overall wardrobe is popular in the present, not only because it is very practical, but also because of the rational use of space, there are many economic advantages. Its cost is calculated according to the material area of ​​the cabinet, and the price of different internal configurations is also different.
â—†The difference between the whole wardrobe and the finished furniture
Consistent style is the biggest feature of finished furniture, and it is also a "fatal" shortcoming, which is easy to cause unreasonable use of space. For example, the finished wardrobe, the usual height is about 2.1 to 2.2 meters, and there are nearly 40 to 60 centimeters from the roof. This part of the space has unreasonable waste. Moreover, in the case of large wardrobes using sliding doors, the door changes are very small, mostly MDF, which can be seen from the frame material, which is basically a 5 mm aluminum alloy strip, which also restricts its change.
The biggest advantage of ordering the whole wardrobe is that it can make full use of the effective space and make the design more human. It can be arbitrarily designed according to the needs of the subscribers, or there are many drawers, or multiple partitions, and it is also possible to add a basket of any size in advance, which makes it more versatile and arbitrarily. In terms of price, the price of finished panel furniture is calculated by piece. The price is mostly between five and six thousand yuan and seven thousand yuan. If the overall wardrobe is used, the general price is calculated based on the practical area of ​​the board. This depends on the design of the cabinet. And what is the accessory. The price of the overall wardrobe is calculated in square meters, based on the amount of material used. Clearly understand the concept of consumption.
â—†The difference between the overall wardrobe and the custom-made furniture of the decoration company
At the time of decoration, many consumers have made several convenient and practical wardrobes in the appropriate places at home. In the past, the usual method was to use the cabinets made by the decoration company, so what is the order of the whole wardrobe and the cabinet made by the decoration company? What is the difference? Let us take a look at several aspects.
1. From the production process:
Decoration company: generally based on manual, the material is mostly large core board, plywood. The price of the large core board and splint used by the decoration company is not high, and it can meet environmental standards. Since the cabinet is made by hand, the connection of the cabinet is mostly nail-based, and the locking is often inaccurate, so that the time is long, the nail is easy to loose, and nail holes appear. The edge of the cabinet is also hand-sealed, and the tightness and fineness will be poor.
Customized wardrobe: High-density fiberboard, double-sided melamine. The production of the assembly line and the automatic machine edge sealing ensure the high degree of closeness and fineness of the overall wardrobe.
2. From the connection between the cabinet and the wall:
Decoration company: Since the general wall surface will not be completely horizontal and vertical, there will be a certain degree of inclination. The cabinet made by the decoration company can be closely combined with the wall to make no gap. On the other hand, the cabinet has the disadvantage of being difficult to move and fixed.
Customized overall wardrobe: generally does not have such a close combination with the wall, the wall and the cabinet are more closely connected by the closing plate. The whole wardrobe is handed over to the ceiling, the plaster line, and the skirting line, which is more closely connected with the wall. At the same time, it has the advantages of easy movement and convenient disassembly and assembly, showing the advantages of home DIY. â—†The basic structure and characteristics of the overall wardrobe
The overall wardrobe looks very simple. It seems that there are a few doors that cover the cabinet inside. In fact, today's wall cabinets, if you look carefully, have a lot of learning.
The overall wardrobes on the market today are mainly divided into two categories, one is gated and the other is open (no door). The open-type wall-mounted cabinets will have a beautiful view of the colorful clothes, which is very suitable for young people's home atmosphere. If you have more heart, you can use this as the main body and build a cloakroom. The reporter saw an open-type wall-mounted wardrobe, imported from the United States, using a white light blue plate, elegant and stylish, very beautiful.
The whole wardrobe with doors has a beautiful article on the door. For example, the appearance of the tiger, the spotted dog pattern, the leopard pattern, etc., looked like a hanging picture. The materials currently available for the production of sliding doors on the market are wood, glass, mirrors and other materials. The wooden board is simple and natural, and it is more popular. The matte and cloth-patterned glass doors bring the effect of obscuration, especially under the light mapping. Silver-plated glass has a high-end luxury. The transparent glass door looks crystal clear. In addition, there are louver doors, which are very novel.
The internal structure of the whole wardrobe is also quite a mechanism. The cabinet can be a variety of cabinets. According to the size of the indoor space and personal preference, a number of cabinets can be selected for free combination. The number of movable panels and drawers can also be increased or decreased. In addition, in some wall-mounted wardrobes are also equipped with elastic stretching equipment, any upgrade, simple and practical, reflecting the unique design ideas, so in the wall-mounted wardrobe, where is the drawer, where is the partition, where to put clothes They will be arranged for you, even towels, socks, ties, etc., can also be used for everyone, some wall cabinets are also equipped with pants racks with pulleys, you can hang up a dozen pants, keep ventilation, no wrinkles, It is easy to see at a glance.
â—†The raw materials and accessories of the whole wardrobe
First, the plate
The board is the main component of the overall wardrobe, and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards (particle board), and fiberboard. Among them, fiberboard has high density, medium density and low density.
1, particle board (particle board): middle long wood fiber + fine wood fiber on both sides, pressed into a board. There are 18MM, 25MM, and so on. The expansion ratio, fire resistance, deformation resistance, and nail holding power are superior to the MDF. The high quality imported particle board meets the highest European E1 standard and the formaldehyde content is less than 0.9mg/100mg. The molecular structure is tight, the bending strength is high, and the moisture-proofing agent is added, and the nail holding ability is strong, and the specification is 2.44*1.22, which is 4.8 ft.
2. MDF (fiberboard): The powdered wood fiber is pressed at high temperature and the surface is flat. It is suitable for blister board, baking varnish board, etc. Because it is mostly broken into pieces, and the particle board has long wood fiber, more retains the characteristics of wood, so the MDF expansion rate is higher than the particle board and it is easy to deform. Second, the material of the border
At present, the frame materials of all the wardrobes on the market mainly include aluminum alloy, aluminum-titanium alloy, magnesium-titanium alloy and high-quality color steel. In general, magnesium-titanium alloy and aluminum-titanium alloy have high strength, durability and firm quality to ensure the door. Up to 2.8 meters without deformation, smooth sliding. The carbon steel frame is light in weight and the appearance is painted, and the paint will be stripped or oxidized and rusted for a long time.
The pulley of the closet is divided into the upper wheel and the lower wheel. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled. The bearing capacity can reach 200 kg, the wear resistance is high, and the push-pull life can reach more than 300,000 times.
At present, some brands use a set of upper wheels (hanging rails), so that the lower wheel must bear the weight and play a guiding role. The pressure is too large, it will be easily deformed after two or three months, and the service life is not high. In the case of Elyland, the upper and lower sets of wheels are used, the upper rail is guided, and the lower rail is loaded, so that the pulley can be better protected, so that the maximum load of the pulley can reach 200 kg, and the service life can be as long as 300,000 times or more.
Third, the main accessories of the wardrobe
There are rotating clothes hanging, push-pull mirrors, lattice racks, pants racks, tie grids, etc. The wardrobe accessories can not only reflect the design inspiration of the wardrobe, but also meet the needs of customers. It is the soul of the whole wardrobe.
1. Trousers rack: The stacked pants will have creases, while the trousers racks will not leave creases in the trousers. It requires no less than 600mm of hanging space, so the trousers rack will usually be placed under the drawer, so Can save space.
2, pull plate: stacked woolen clothing code put together to find it will be very troublesome, if you use the pull plate can make the stacked clothes well, but it also has the disadvantage of less storage space, so customers should choose carefully .
3, each successful man will have a number of ties, these words are lined up in a non-tie box. This tie box takes up less space than a drawer, so you can arrange the position of the tie box at will by seeing the pins. Your socks, shorts, scarves and other small items have a home.
4, push-pull mirror: the wardrobe must have a face dressing mirror, the overall wardrobe design of the dressing mirror hidden in the closet, a light pull can appear, push back the dressing mirror tightly next to the cabinet board, no occupation of the wardrobe Inside space, a small mirror makes you radiant.
Fourth, how to identify the material
1. Plate material: The surface of the plate is made of melamine veneer. It does not need paint. The surface is fine, the structure is flat, the texture is hard, and it is anti-mite and flame retardant. It is called “no defect plate†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.
2, sheet anti-counterfeiting: brand logo on both sides of the embossed board and edge sealing.
3, smell, water test (too fast and not to be lifted).
4, edge sealing: whether it is smooth, delicate, strong adhesion (pseudo-defective process carefully cracked).
5, the table should be like one: look at the material inside the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.
6, standard specifications of the board: there are standards, process and precision are guaranteed.
7. Aluminum alloy sliding door frame material: look at the cross section bright and smooth without burr, the minimum wall thickness requirement is 1.1mm;
8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides).
9. Push and pull to listen to the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.
10. In short, carefully understand the sample to prevent consumption traps.
â—†How to choose the whole wardrobe
Buying a whole wardrobe, it is best to choose some well-known brands when the economy allows. For example, the furniture such as the wall cabinet usually takes 8 to 10 years. In addition to the quality of the famous brand goods, the after-sales service also has certain guarantees. If you want to change the pulley or the veneer, you can have a channel to solve the problem. If you want to further purchase from a professional point of view, there are also a few points to note, the reporter integrated the opinions of several brand agents, summarized as follows:
1, materials. Most of the overall wardrobes on the market use medium density fiberboard, some use moisture-proof panels, medium-density panels are better, in addition to look at the veneer. The hardware of the whole wardrobe is also very important, such as carbon steel, titanium alloy, aluminum alloy and so on. The smoothness, wear resistance and pressure resistance of the pulley are also very important. The pulleys of the brand wardrobe are generally made of carbon fiberglass, with balls inside, with non-drying grease, and almost no noise when pushing and pulling. In addition, good pulleys are often designed with two anti-jump devices to ensure reliable and safe door sliding. There is only one anti-jump device or a pulley without an anti-jump device, and the door is easily derailed when in use. 2. Is the cabinet design scientific? A good overall wardrobe cabinet, usually composed of different cabinets, can be customized according to the customer's actual situation; drawers and shelves can be freely increased or decreased. However, the reporter should remind everyone that when preparing to order a wall cabinet, you must first book a specific location at home, and then measure the size. Since some roofs have beams, if this factor is not taken into consideration, it is likely that the overall wardrobe that is ordered will not fit into the wall.
3. Is the accessory complete? Push-pull mirrors, lattice racks, pants racks, pull baskets, and L-frames. Whether these accessories are complete is an important criterion for judging whether the design has a "people-oriented" concept.
4. Whether to choose green environmental protection materials. The formaldehyde content of the cabinet door or cabinet material is too high, which will adversely affect the user's health. How to judge the formaldehyde content exceeds the standard? The simple way is to open the door and pull open the drawer. If it exceeds the standard, it will emit a strong irritating smell and even make people cry.
â—†Select the overall wardrobe expert advice
The popularity trend of the whole wardrobe is unstoppable, but most consumers still don’t know much about it. For example, how to judge the environmental protection of the cabinet board? Where is the fine craft performance? How to calculate the price? Can you tailor it? Is there a consumption trap? Experts remind consumers to grasp the following key points:
1. Whether the material selection is environmentally friendly is related to the health of you and your family. Therefore, the cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001, formaldehyde emission ≤1.5mg/L, water content in 5- 11 between.
2, whether the board is strong or not, it determines the service life of the cabinet, the thickness standard should be 18mm, the density standard is 0.6?0.9g/cm3, sturdy and durable, the service life should be more than 15 years, of course, if you want to thicken, But the price is definitely higher.
3, whether the process is fine or not, the most important thing is to look at: A. The edge of the board. The edge of the machine is generally uniform, no black lines and sawtooth prints are visible, and the hand-sealed edges will have some roughness, which will hang clothes, especially expensive silk fabrics. Good edge seals are generally of the same color and have a thickness of 1.5-2 mm; Whether the back plate is slotted or not, to ensure stability, it is best not to use nail nails for fixing the back plate. It is easy to rust for a long time and affect the service life of the wardrobe.
4, whether the product is energy-made, the current house is mostly frame structure, there are many beams and pillars, how to hide and modify these beams and columns, related to the overall aesthetic effect of the wardrobe, high-grade overall wardrobe can be based on the specific space structure Designed and available as a non-standard setting service.
5, whether the price of the cabinet is transparent, first of all to ask the manufacturer's calculation method, and then ask the price of the items included, such as whether the price of drawers and laminates, hardware accessories (usually open area algorithm does not contain drawers, laminates The price of hardware accessories. The most popular and fair algorithm in the world is based on the actual standard materials used. It is most reasonable to buy how many things to pay.
6. Is it produced by a regular brand manufacturer, has it passed environmental certification and health certification? Whether it is a three-nothing product, it is best to choose a branded product with anti-counterfeiting mark, promised multi-year warranty and lifetime maintenance.
7, to choose the best value for money brand wardrobe quality products are indeed more expensive, but the wardrobe is a long-term investment, if you choose a poor quality wardrobe, the loss for you can not only It’s a little money...
8, accessories are also very important, all accessories (such as connectors, screws) are consistent with the brand of the overall wardrobe, each part has a brand letter engraving logo? Only uniformity can guarantee the bearing capacity of key parts and ensure comprehensive performance.
9. Whether the installation service personnel have undergone unified formal technical training. All in all, to buy a whole wardrobe, we must compare, analyze, and make decisions.
â—†The necessity of selection and design of the whole wardrobe before decoration
The main features of the overall wardrobe are: standardized modules, tailor-made. Why do you choose and design before the renovation? This is because:
1, the structure of the bedroom largely determines the width of the overall wardrobe and the design of the internal space structure of the cabinet. In order to use the actual hanging space of the cabinet, it is necessary to change the room layout during the decoration design. After all, everyone There are a lot of clothes, and even the need for storage (quilts, etc.).
2, the overall wardrobe is a large piece of furniture, its placement directly affects the overall layout of the bedroom.
3, its custom width size, will affect the location, size of the bed, bedside table, dressing table and other household items. 4, design a reasonable overall wardrobe location, but also consider the reasonable wiring of electricity, network (some need to design TV rack in the wardrobe), the location of the switch socket, the hanging position of the air conditioner, the size of the passage in the bedroom, etc. .
5. Based on the principle of the overall style of the bedroom and the main melody color, the color of the cabinet of the whole wardrobe, the style of the wardrobe sliding door, the color of the door panel and the floor to be selected, the bed frame, the bed cover (single), the curtain, etc. should be selected in advance. Coordination of color and style of household products.
6. If you need a ceiling, you should also consider the reasonable overall height of the wardrobe.
7. For the decoration of most houses at present, modular, integrated and integrated decoration trends are adopted. The whole wardrobe, the overall study room, the wine cabinet, the shoe cabinet, the locker, the entrance cabinet and even the TV cabinet are tailor-made. More need to plan ahead.
Most of the current buildings are frame structures, so the location of the wardrobe in the bedroom will inevitably encounter special obstacles such as beams and pillars. How to plan for the rain?
First, the pillar plate and the cladding beam plate can be designed according to the shape of the beam and the pillar, and the beam and the pillar are hidden, and not exposed, so that the wardrobe forms a joint body, and the space is rationally utilized. The 18mm thick plate is required for the column and the cladding beam to ensure that the assembled overall wardrobe is firm.
Second, the position of the pillars can be designed as a special place for stacking small items or placing shoes, hats, ties, etc.
Third, if there are objective beams and pillars, the overall wardrobe design should also consider the left and right wide side panels of the light should be open L-shaped integral panels.
Fourth, the sliding door is designed to the top of the ceiling, and the side of the front side of the beam should be sealed by the same size as the beam, and the seam is sealed from the bottom of the beam to the floor to ensure that the sliding door can be completely closed when closed.
Fifth, if the overall wardrobe is designed such that the top cabinet is a wooden board that is flattened and the lower cabinet is a sliding door, the side of the front side of the beam should pass through the same size as the beam, from the bottom of the beam to the lower cabinet. The top plate seams it.
Sixth, if the cabinet may touch the switch socket, cable TV, broadband socket, etc., the overall wardrobe service provider should be evaluated and measured at the progress of the hydropower wiring to ensure that they can be used reasonably in the future.
3 Sides Seal Bag,High Quality 3 Sides Seal Bag,3 Sides Seal Bag Details, CN
Dongguan Yoteng Technology Co., Ltd. , https://www.ytpropackage.com