The environmental protection, workmanship and backboard of the wardrobe plate are the main points to consider when purchasing the wardrobe.
[ Chinese wardrobe net ] Wardrobe is an important piece of furniture used to place clothes in our daily life. It has the characteristics of stable structure, convenient use, improved space utilization, environmental protection, and simplicity of the purchase process. How to choose a wardrobe?
See if the wardrobe sheet is environmentally friendly
Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.
According to China's environmental protection standards, according to the concept of formaldehyde emission limit, the formaldehyde limit level in the board is divided into three levels, E2≤5.0mg/L, E1≤1.5mg/L, E0≤0.5mg/L. In China, the board can reach the E2 standard. To buy a wardrobe, we must first see whether the manufacturer has a plate inspection report and relevant testing certificate from the national authority inspection department.
See if the work is meticulous
Some wardrobes look good on the surface. In fact, with a finger stroke, you can draw obvious scratches. These wardrobes are made of surface-coated vellum paper and ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional manufacturers use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment. The surface strength is high, abrasion resistance and scratch resistance.
Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After sealing around, it effectively prevents moisture from entering the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and cut only the front side of the board. The non-sealing surface easily absorbs moisture in the air, causing the sheet to expand, causing the wardrobe to deform and affecting the service life.
Professional manufacturers use professional automatic edge banding machine, using environmentally friendly hot melt adhesive to seal the edges, and the veneer is firm. The auxiliary materials used in the production process are environmentally friendly, in order to ensure the environmental protection of the final produced wardrobe, and to ensure that there are no harmful substances. Some manufacturers, without professional processing equipment, use ordinary universal glue to manually seal the edges, easy to pull off the drum. In addition, the harmful substances such as benzene and formaldehyde contained in this rubber are seriously exceeded, posing a potential threat to human health.
Look at the backplane structure
Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer, and a trough-type reverse leather lap joint structure to prevent the back plate from directly absorbing the moisture on the wall surface. Some brands have thin back plates and are connected by nail-type back plates. The back plates are in direct contact with the wall. The moisture on the wall is easily absorbed by the plates, which is easy to get wet, moldy and deformed, and the cabinet loses its sealing. .
Brand wardrobes are professionally produced. Functional parts (drawers, trousers racks, tie trays, etc.) are standard designs. The width, depth and height are standard. At the same time, in order to meet the individual needs of customers, we also provide customized quality. And in line with the concept of professional custom home.
The pneumatic lifting table is a simplification of the automatic lifting table. It eliminates the need for a motor or compressor, and adjusts the air pressure bar manually to achieve the function of lifting
advantage:1. Low price and high cost performance 2. No need to connect to electricity, no oil, good safety.
Disadvantages:1. The stability is not high 2. It takes a little effort to raise and lower, and some buttons need to be lifted by hand to achieve the purpose of up and down.
Adjustable Office Desk,Standing Computer Desk,Pneumatic Standing Desk,Office Desk Adjustable Table
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.office-standing-desk.com