Custom wardrobes start with a choice of plates

[ Chinese wardrobe network ] Although the custom wardrobe has only entered the Chinese market in recent years, it has quickly become popular. According to the designer, the reason why the whole wardrobe is favored by consumers is that it can be industrialized and tailored, and it is environmentally friendly, fashionable and professional. However, the core material used as a custom closet is the most important part of the custom wardrobe and the most used part. The quality and workmanship of the panel used by the wardrobe manufacturer directly determines the quality of the overall wardrobe.

1, different grades, plates are also different

How to judge the plate of the custom closet? Generally, the cut surface of the sample is seen. From the cut surface, the blockboard is two or four layers of upper and lower boards (also thickened using four or more single boards) close to the solid wood core, the quality of the fine board. The core cut surface is flat and there is no gap; the MDF is pressed by fine fibers, the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough, the weight is light, and the quality is poor. There are small pores; the multi-layer board is made of a plurality of veneers, generally three or five layers.

2, look for environmentally friendly sheet

Some manufacturers choose some inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.

3, quality trustworthy plate

The brand-name wardrobe has a good look on the surface. However, with a finger stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance.

4, sheet edge sealing to see work

Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life. The capable person with the leading design concept of the wardrobe, while pursuing the high-quality manufacturing process of the wardrobe, pays more attention to the personalized overall solution provided by the high-end family.

It's not easy to define the bedroom, and the impression of the bedroom is different for each person. It is only careful to define a comfortable and comfortable bedroom living.

Backlit LED Mirror

Backlit Led Mirror,Backlit Bathroom Mirror,Led Backlit Vanity Mirror,Led Backlit Bathroom Mirror

Aosmay , https://www.aosmay.com