[China] net wardrobe custom closet What better plate, custom closet has many advantages, custom closet now more and more people, but the first custom closet people usually perplexed in the selection above, not I know what kind of plate is used for custom wardrobes, and I don’t know what kind of plates I want to use to customize the wardrobe. Today, I will follow the small series to understand the plates that are commonly used in custom wardrobes. I don’t have to worry about custom wardrobe selection.
Particleboard: Particleboard, also known as particle board, is made of medium-length wood fiber and fine-grained wood fiber on both sides. It is pressed into a plate by high temperature and high pressure. Its substrate is made of plantation, natural forest trunk, branch shavings or shavings. The particle board is usually 18mm, 25mm. The advantage is that the expansion rate is small and the stability is strong. The disadvantage is that the method is easy to make, the quality difference is big, and it is difficult to distinguish. The edge of the particle board is rough, easy to absorb moisture, the density is loose and easy to loose, the nail holding power is low, and the glue amount is large. Only the high quality imported particle board meets the highest European E1 level. Standard, formaldehyde content is less than 0.9 to 100.
Melamine board: The full name is melamine impregnated film paper veneer wood-based panel. It is used to put paper with different colors or textures into the melamine resin adhesive to be soaked, then dried to a certain degree of curing, and laid on the surface of particleboard, medium density fiberboard or hardboard, which is hot pressed. Decorative plates.
At present, the substrates used in panel furniture on the market are all such panels, and the substrate is divided into a trimeric hydrogen ammonia particle board and a trimeric hydrogen ammonia density board. The melamine board has more design changes and more personality. It is the material of choice for European top furniture manufacturers, but the environmental requirements for the board are very strict and must meet the European E1 standard.
Splint: Also known as plywood, commonly known as fine core board. A three-layer or three-layer thin sheet made by cutting a log into a veneer or a wood chip, and then cutting it into a thin wood and then bonding it with an adhesive. An odd number of veneers are usually used, and the fiber directions of adjacent layer veneers are vertically aligned and glued to each other. The splint has six different thickness specifications.
Fiberboard: Fiberboard, also known as MDF, is formed by powdered wood fiber at high temperature. It has good surface flatness, good stability, high bearing capacity and better strength and hardness than particleboard. The internal structure of the fiberboard is uniform, the density is moderate, the dimensional stability is good, and the deformation is small. Therefore, the nail holding force is strong, and it can be disassembled and assembled many times, which is convenient for moving. Moreover, the melamine-finished fiberboard has the characteristics of moisture proof, anti-corrosion, wear resistance, high temperature resistance, etc., and does not require post-treatment, and the formaldehyde content is low. However, the processing precision and process requirements are high and the cost is high.
Blockboard: Also known as the large core board, it is a board made of natural rotary-cut veneer and solid wood panel by glue and hot pressing. The processing technology of blockboard is divided into two types: hand-stitching is to manually insert the wood strip into the splint. The strip is subjected to poor pressing force and cannot be cut and processed. It is only suitable for partial decoration. Such as making a solid wood floor cushion board. The plate of the machine is subjected to a large pressing force, the gap is extremely small, the splicing is flat, the bearing capacity is uniform, and the long-term use is not easily deformed.
Its main purposes are: furniture, doors and windows and sets, partitions, false walls, heating covers, curtain boxes and so on. I believe everyone knows about the most environmentally friendly analysis of the plates used in custom wardrobes on the market.
Regarding the environmental protection of custom-made wardrobes , we are reminding consumers that when customizing furniture, whether using particleboard or MDF, the manufacturer must show the inspection certificate of the board used by the merchant. The general sheet should reach E1. E0 level environmental protection standards, formaldehyde emission will not cause harm to human health. Therefore, it is best to customize the wardrobe to the custom wardrobe brand.
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxnaturaloils.com