[ Chinese wardrobe net ] For many families nowadays, cloth wardrobe is a good choice. It is more convenient to disassemble and move than the solid wood wardrobe cloth wardrobe. Then, how to install the cloth wardrobe after buying it? How to maintain it? The following small series will introduce you to everyone, I hope to help everyone.
How to install the cloth wardrobe?
Cloth wardrobe installation steps 1, check the packaging
First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged, if there is, it is likely that the steel pipe inside is also crushed, such goods must not be signed and purchased, must Check it out clearly.
Cloth wardrobe installation steps 2, check accessories
Open the package, and then check whether the accessories inside are complete, there is a manual, check on the manual, if it is less, it is estimated that it can not be installed without loading, so the number of advances is clear, so as not to be wasted. When installing, be sure to wear gloves, without gloves, your hands will be very painful, but Xiaobian has deep experience, and you must carefully read the instructions, do not think you can.
Cloth wardrobe installation step 3, the first to install the bottom
First install the bottom one, take out the four-way joint with the bottom and the high, and connect the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, and decide the position to be placed. Install a long tube on one side and a short tube on the other. Then install the base fabric on both sides, and then install a three-way joint around each other. Xiao Bian reminds everyone to see which kind of tube is used when installing the tube, otherwise it will be troublesome if it is installed in the back.
Cloth wardrobe installation step 4, set of wardrobe cloth cover
After installing the bottom, insert six short steel pipes, then put the whole wardrobe cloth up against the surrounding holes, then install a layer of the same partition as the bottom, and then put it on the six steel pipes.
Cloth wardrobe installation step 5, with short-side floor
If the cloth closet is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, and then install the cloth. Then add the four-way connector on both sides. Repeat the baffle until it is attached to the top.
Cloth wardrobe installation step 6, long steel pipe
After the short-side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long tubes to the top.
Cloth wardrobe installation step 7, loading the top steel pipe
After both sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side backwards. In order to avoid the installation, the hanging steel pipe can also be installed with a hook-type joint, which is relatively simple.
Cloth wardrobe installation step 8, cover wardrobe cover
When the top of the big set is at the top, it is best to pull the bottom to the top so that there is space to pull up until the top corner is installed. At this time, the cloth cover can be pulled down. Be careful when pulling. Don't be too hard. This kind of wardrobe is installed, after the installation, I feel that the whole wardrobe is big, beyond the imagination of Xiaobian, it takes an hour to install it, as long as it is careful, it will not be wrong.
How to maintain the cloth wardrobe?
1. When the weather is too humid, the doors and windows should be opened regularly for ventilation, and a small bag of dry lime or desiccant should be placed in the corner of the cloth closet to prevent mildew.
2. The dust in the cloth closet can be cleaned by a vacuum cleaner or a small brush. The metal parts such as the cabinet frame and the tie rod should be wiped with a dry cloth. The desiccant can be used regularly to keep the cloth closet ventilated and dry, and to prevent the clothes from getting wet. Try to avoid using a chemical-containing fragrance for deodorization, otherwise it may damage your clothes.
3. Remember not to place the cloth closet in direct sunlight, otherwise the non-woven cover will be easily deformed and brittle under illumination.
4, the cloth wardrobe will be slightly deformed after a long time of use, usually every two to three months should check the placement position of the corrective cloth wardrobe to extend the service life.
5, should keep the cloth wardrobe door clean, steel pipe must not have debris, dust. Usually, you can wipe the cabinet and cabinet door with a semi-wet clean rag. The dirt can be cleaned with a small amount of soapy water or a neutral detergent. Be careful not to use corrosive detergent.
About the installation and maintenance of the cloth wardrobe, I will introduce it to you. In fact, as long as the introduction of the small series, it is very easy to install the cloth wardrobe, so you can try it, and you want to know more about the installation of the cloth wardrobe. ,Please pay attention.
Yuyao Shenghe Electrical Appliance Co., LTD , https://www.yyshenghe.com