Mobile Cleanroom Management Specification Shanghai Sujing
1. Cleaning specifications for clean rooms in clean workshops
1.1 Clean room cleaning frequency and cleaning method
A: Ground:
Clean the floor in a certain direction with a dust-free cotton dampened with water, and wipe it once every 5~8 times.
Clean each shift before starting work. (Special post: the combination is cleaned according to the combination management regulations)
Clean floor standard - wipe the floor with a dust-free cloth 1M, dust-free cloth can not be stained with dust, can not be dirty.
B: Ceiling and walls:
Clean with a clean, dust-free cotton dampened with clean water in a certain direction, and wipe it once every 5~8 times.
Clean thoroughly every three days. (Special post: the combination is cleaned according to the combination management regulations)
Clean standard - use a clean cloth to wipe the ceiling and wall 5M, dust-free cloth can not be dusty, can not get dirty.
C: Return airway:
Clean with a clean, dust-free cotton dampened with clean water in a certain direction, and wipe it once every 5~8 times.
Clean it once a week. (Special post: the combination is cleaned according to the combination management regulations)
D: return air window:
Clean the sides of the window with a clean cloth dampened with clean water in a certain direction.
Clean it once a week. (Special post: the combination is cleaned according to the combination management regulations)
Clean standard - wipe the window leaves with a dust-free cloth. The dust-free cloth should not be stained with dust and dirt.
E: Window:
Scrub with water or clean the glass with a lint-free paper.
Clean it every day before going to work.
Clean standard - wipe the window leaves with a dust-free cloth. The dust-free cloth should not be stained with dust and dirt.
F: ceiling and wall hangings
Scrub with water or clean with a lint-free paper.
Clean once a week.
G: shelf, material cabinet, workbench
Scrub with water or clean with a lint-free paper.
Clean once a day, another: as long as there is dust and dirt, you have to clean it immediately.
2, clean room behavior norms
2.1 wearing clean clothes
The clean clothes, hats and shoes are clean and tidy without damage. Hair and nose should not be exposed when worn.
Cleaning frequency: once a week. (If the cleansing suit is dirty, you have to replace it immediately.)
2.2 Air shower room regulations
Entering the workshop or entering the printing post must be windy, turn 360 degrees when the wind is dripping, stretch the body limbs, pat the clean clothes, wait for 4~5S after the wind shower is finished, then push the wind shower door into the workshop.
Air shower indoor and outdoor sticky mats need to be replaced in time.
2.3 gloves and finger sleeves
The materials and semi-finished products and finished products must not be taken in the workshop.
Gloves must be worn to enter the combined position and silk screen position to maintain the cleanliness of the workshop.
2.4 Workshop Behavior
The behavior in the workshop must comply with the regulations on clean room management.
The movement of items and tools in the workshop needs to be handled with care.
Foam Mattress,Latex Foam Mattress,Memory Foam Mattress,Hotel Memory Foam Mattress
HESHAN HAIMA FURNITURE CO., LTD , https://www.springmattress.com