Barcode printer common problem solving method

1. The barcode machine will report an error after the paper is printed. If the label sensor does not detect the paper, please check whether the label sensor under the label paper is aligned with the label paper print content and re-do the paper test operation.

2. 2140 printing double-row label paper error: Please change the label paper into side-by-side label paper in the printer properties. (Print - Properties - Volume - Media Type - Side by Side Label)

3. The printed content is illegible: Kecheng machine: adjust the printing brightness when printing, the copper label paper is about 10 degrees, the film is coated, the sub-silver label paper printing depth is above 15 and 16 degrees, can be adjusted properly, the ribbon The printing needs to use heat transfer, and the thermal paper uses thermal sensation. Image machine: Print - Properties - Options - Depth, remove the checked 'Use current printer settings', adjust the depth, the copper label paper is around 8-9 degrees, the film, the ADB label paper print depth is above 13 degrees Can be adjusted appropriately.

4. When the printer prints, skip a piece of paper to print: check whether the label size of the software typesetting exceeds the range of the label to be printed; press the feed button to check whether the machine has two sheets of paper; if so, re-do the paper measurement operation.

5. The printing software does not respond after printing: check whether the barcode label ribbon is installed correctly, whether the printing line is loose, and the vertical image machine also checks whether the barcode driver is working properly (find the printer and fax in the computer operating system, View the barcode driver, right click - Properties - Print Test Page.

6. The barcode machine prints garbled characters or does not display. After the content is input, there are more numbers or letters: Kecheng Machine: Check the text input method, please do not use AText built-in font to input Chinese content, use WINtext font input. Image machine: Image is currently commonly used argox bartender10.0, because the software is a fee-based software, this will happen in the trial version after the 30-day trial period, please change the version back to UItraLite in the software help option .

7. Regarding the error of the bar code machine sounding flashing: (1, Kecheng machine) twice in two consecutive times: the bar code machine did not measure the paper; the last two times sounded three times: the bar code machine ribbon error; two consecutive times ringing four Bottom: The printer head of the barcode printer is not covered; the two lights are not flashing at the same time: the temperature of the print head is too high.

(2, vertical image machine) two lights flash simultaneously: the machine can not detect the label paper; two lights alternately flash: the machine can not detect the ribbon.

8. After the label is printed, if the end of the last label remains in the printer, it will cause inconvenience in tearing the paper. The reason is that the post-printing operation function in the printer driver is not set: (print-genuine-volume-field), and the operation is set to "tear off" after printing, and the confirmation is completed.

9. QLABEL software found that the operation bar is all in English, how to change to Chinese: find the Advance taskbar, click on select language to select Chinese to switch to Chinese

10. Bar code printer printing thermal paper error: barcode printer needs to change to thermal mode when printing thermal paper: Kecheng machine (right margin label area blank area - barcode machine setting - print mode - thermal type) vertical image machine (Press Print - Properties - Volume - Print Method - Thermal)

11.bartender software prompts to enter the file name when printing: first check the print properties to see if there is a click to print to the file, if not, open the printer properties on the system (XP system opens the printer and fax win7 system to open the device and printer) to find the print driver , right click property - port - change the print port to any USB port