5.11 Importance of Machine Installation
The installation of the machine directly affects the accuracy and life of the machine. Take the foundation as an example. If the strength of the foundation is not enough, and the time is long, the level of the machine will be destroyed. When you are at the school level, you must not be so-so. You must follow the procedures and data. The level of the machine is not good, the impact on the machine is not manifested in a short time, and its concealment is too strong. Therefore, the level of the machine should be checked regularly. Some people disagree with this, thinking that as long as the screws are screwed on and the gears are on, the machine can work. As far as the data is a bit more and less, it does not matter. This kind of ideology must not be denied. Sometimes this may be due to this little mistake, leaving the user with endless trouble.
6 Machine maintenance
6.1 The importance of machine maintenance
Machine maintenance is an important part of equipment management. First of all, it can greatly slow down the speed of machine precision. The decrease of machine precision is mainly manifested in the wear and plastic deformation of machine parts. Due to the wear and deformation of the components, the movement relationship (time and displacement) between the components is destroyed, thereby reducing the accuracy of the machine. Practice has proven that machines that are not maintained or maintained are less accurate than they are maintained. Second, good machine maintenance can increase the utilization of the machine. In addition to normal factors, machine accuracy is also related to a number of abnormal factors, such as machine operation. Poorly maintained machines suffer from a greater loss of accuracy and, as a result, have to be shut down and repaired frequently, affecting production. In addition, good machine maintenance can extend the life of the machine, and wear and deformation of machine parts are unavoidable. The ultimate goal of machine maintenance is to maintain a normal loss of machine accuracy while extending this process as much as possible.
The so-called machine maintenance is to take all measures to make the machine in an ideal working condition. Only the components on the machine are in ideal working condition, the whole machine will be in ideal working condition. Therefore, the maintenance of the machine includes the maintenance of each component and the maintenance of the entire machine. The contents of machine maintenance are quite extensive. The following describes the general method of machine maintenance using an offset press as an example.
As mentioned earlier, offset presses are divided into six major lines. The maintenance of the machine should make each alignment ideal.