How the product works:
The cleaning principle of the ultrasonic cleaner is based on the effect of ultrasonic cavitation, that is, the high-frequency signal is generated by the high-frequency oscillation generator, which is converted into mechanical high-frequency vibration by the transducer, and numerous bubbles are quickly formed in the cleaning solution and quickly implode. The resulting impact will peel off dirt on the inner and outer surfaces of the workpiece immersed in the cleaning fluid. Therefore, high-frequency ultrasound is particularly suitable for cleaning small particles of dirt without damaging the surface of the workpiece.
Product performance and characteristics:
1. High precision Because the ultrasonic cleaner uses the effect of bubble cavitation, the energy of the ultrasonic cleaner can penetrate the tiny gaps and small holes, so it can be applied to the cleaning of any part or assembly. When the parts to be cleaned are precision parts or assemblies, ultrasonic cleaning often becomes the only cleaning method that can meet its special technical requirements.
Second, the rapid ultrasonic cleaning is much faster than the conventional cleaning method in terms of dust and scale removal of the workpiece. The assembly can be cleaned without disassembly. The advantages of ultrasonic cleaning that can save a lot of labor often make it the most economical cleaning method.
3. Consistency Whether the parts to be cleaned are large or small, simple or complex, single parts or batches, or on an automatic assembly line, ultrasonic cleaning can be used to obtain unparalleled consistency of manual cleaning.
Fourth, safe and reliable The company's ultrasonic cleaner is equipped with a water shortage protection circuit to make the product work in a safe and reliable environment.
Instructions:
1. The instrument is normal after unpacking. Place the instrument properly according to the precautions for installation and connect the 220V / 50Hz power supply to the instrument.
2. Add the water or aqueous solution needed for cleaning, and add appropriate cleaning agent to the solution to improve the cleaning effect.
3. During the cleaning process, please place the workpiece on the grid, and put the grid into the cleaning tank steadily. Do not place the workpiece in the water tank directly. This will reduce the cleaning effect and damage the instrument. The damage caused in this way will be regarded as artificial damage.
4. The user who chooses the H-type instrument can turn the heating knob to perform the heating operation. At this time, the heating indicator will light, turn the timer knob to set the cleaning time, the instrument starts cleaning, and at the same time, the cleaning indicator ( H type) will also light up. Since the instrument is equipped with a water shortage protection device, the indicator light will not light when the water is insufficient or the water level is insufficient, and the instrument is neither heated nor cleaned.
special reminder:
1. When the device is used, the power supply must be reliably grounded, otherwise, the accidents caused by it have nothing to do with our company.
2. The workpiece must be cleaned on the grid, otherwise the instrument will be damaged and has nothing to do with the company.
3. Pay attention to whether it is corrosive when using cleaning reagents. It is strictly forbidden to use strong alkalis, strong acids and flammable and explosive reagents and solutions, otherwise it will cause damage to the instrument and has nothing to do with our company.
4. Water, solution or corrosive gas must not invade the inside of the instrument, otherwise it will cause damage to the instrument and has nothing to do with the company.
5. It is forbidden to heat or clean in the state of no solution or insufficient water level, otherwise it will cause damage to the instrument and has nothing to do with our company.
Melamine Board,Paint-Free Board,Double Sides Melamine Plywood
Shandong Yami Import and Export Co., Ltd. , https://www.yamiplywood.com