Article read: TAG Heuer watches in the watch industry belong to the high-end watches, including the TAG Heuer mechanical quality excellence, but still need maintenance, it is recommended that every 1-2 years should be made accordingly maintenance, replacement of waterproof components, travel time performance and movement of power consumption, Cleaning the movement and maintenance of appearance. This maintenance service will effectively extend the use of your mechanical watch time. Next, Xiaobian will detail for you how to maintain Hoya mechanical watch. TAG Heuer watches in the watch industry belong to the high-end watches, including the TAG Heuer mechanical quality excellence, but still need maintenance, it is recommended that every 1-2 years should be made accordingly maintenance, replacement of waterproof components, travel time performance and movement of power consumption, Cleaning the movement and maintenance of appearance. This maintenance service will effectively extend the use of your mechanical watch time. Next, Xiaobian will detail for you how to maintain Hoya mechanical watch . Dai Hao Ya mechanical watches, hand sweat on the case is corrosive, all-steel case is nickel-chromium alloy, corrosion resistance is better, semi-steel case is copper, long-term contact with sweat, easy to corrode, should often Use a soft cloth to wipe off the sweat or plastic watch holder to prevent it from sweat erosion. ? ? Do not open the back cover of the mechanical watch at will, so as to prevent dust from entering the movement and affect the normal work of the watch. Do not put the watch in a wardrobe with mothballs, in order to avoid deterioration of the oil table. Do not watch on the amplifier, audio, TV, to avoid magnetization. Long-term storage of mechanical watches should not be worn, the clock should be regularly on a monthly basis, TAG Heuer that should be gently swing back and forth for a few minutes or worn on the wrist for some time so that it automatically tighten the clockwork. So that parts will not be long-term in a quiescent state, in order to ensure the performance of the table machine. Ordinary mechanical watches by the tide, available dry cotton pressure on the watch, and then 40 watts of light bulbs for 5 minutes, the moisture in the table can be evaporated. TAG Heuer demolition demolition of mechanical watches, be sure to save the box used to protect the watch. These boxes give the safest protection for the watch, preventing the watch from being broken or crashed. Mechanical watch to be renovated. After the watch was delineated a lot of track pattern, you can cast drops of water on the table first drops of water, squeeze a little squeeze toothpaste, you can remove the scratches and make the table Mongolia as new. TAG Heuer watches in Switzerland is the leader in many high-end watches, as long as the daily wear good watch maintenance, watches can be used for many years.