Recently, Shenyang Quality and Technical Supervision Bureau conducted 180 sampling inspections on 180 wooden furniture, sofas, spring soft mattresses and indoor wooden door manufacturers in the city. Yesterday, the reporters from Beiguowang and Liaoshen Evening News were informed that there were 138 qualified enterprises and 138 batches of qualified products, and the sampling rate of products was 76.7%. At present, the unqualified products that have been sampled this time have been banned from shipment, and are not allowed to be sold to the circulation field. The production enterprises that fail to pass the supervision and inspection twice consecutively will be punished according to law.
Wooden furniture formaldehyde exceeds the standard
It is understood that 120 batches of products produced by 120 wooden furniture manufacturers participating in the sampling inspection have passed 90 batches, and the sampling rate of products is 75%. The unqualified items are mainly manifested in excessive formaldehyde emission and no consumption instructions. .
The reporters from Beiguowang and Liaoshen Evening News found that some wooden furniture exceeded the standard, and the formaldehyde emission of individual wood furniture even exceeded 30mg/L, which exceeded 20 times of the national standard. Yu Tao, a senior engineer of the Quality Supervision Bureau of Shenyang Quality Supervision Bureau, said: "At present, wood furniture is mainly made up of panel furniture, and panel furniture is made up of wood-based panels. Some manufacturers of wood-based panels have not produced formal inferior plates through formal production licenses. Furniture manufacturers to reduce the cost of these low-quality sheet production furniture, which is an important reason for the high rate of formaldehyde emission.
Inferior materials used inside the sofa
In this sampling, 20 batches of products produced by 20 sofa manufacturers were qualified for 14 batches, and the sampling rate of products was 70%. The main reason for the disqualification is the use of inferior bedding, wood, etc. Since the wooden parts and bedding materials inside the sofa are not easily seen by the purchaser, the merchants use the inferior materials in order to obtain greater benefits, resulting in the qualification rate being consistent. Low level.
Spring soft mattress qualified rate is stable
In this sampling, 20 batches of products produced by 20 spring soft mattress manufacturers have passed 18 batches, and the sampling rate of products is 90%. The main reason for the failure of the spring soft mattress is that the hygiene, safety requirements and spring requirements do not meet the standard requirements. Due to the small scale of the company, it does not pay attention to the management of the enterprise, only pursues the immediate interests, and uses unqualified bedding materials, which are not strictly controlled in the production process and production procedures, and lack relevant tests on the finished products.
Indoor wooden door pass rate decline
The 20 batches of products produced by 20 indoor wooden door manufacturers engaged in the sampling inspection were qualified for 16 batches, and the sampling rate of products was 80%. In 2011 and 2012, the pass rate of indoor wooden doors was 100%. According to Yu Tao, the unqualified items in this spot check mainly lie in the impregnation and peeling of the wooden door and the surface impact resistance performance does not meet the standard requirements. The reason is that the brand awareness of the enterprise is weak and the management method is backward, at the cost of reducing the cost to reduce the product quality.
High Frequency Wand,Nuderma High Frequency Wand,Frequency Wand,Best High Frequency Facial Wand
Foshan Liqia Hardware Products Co., Ltd. , https://www.liqiamei.com