Elm, is rubber wood?

Q: Is the coffin a rubber wood? If not, what is the wood?

A: Rubber wood is the backbone of rubber trees, subtropical tree species, and planted in Hainan Island. After the rubber tree grows, the rubber is cut every year. The knife is used to cut the semi-circular incision slightly downwards on the trunk. The juice flowing out is the original glue, which is the raw material for manufacturing rubber. Generally, after a few years, the tree is old, no longer produces glue or produces very little. You can use its main trunk to make furniture. The material is very general.

Elm is the wood of eucalyptus. The eucalyptus tree is also called oak and eucalyptus, which is resistant to cold. The winter leaves turn reddish brown and do not fall. Until the spring gives birth to new leaves, the old leaves are topped down. There are many Daxinganling Mountains. The eucalyptus leaves are the feed for the tussah. In the Daxinganling people, the silkworms are naturally grown on the eucalyptus trees on the mountain. The fruit acorns are a bit like scorpions, but the people eat not digested, but they are good feed for pigs. The autumn fruits are ripe. When they landed on the ground, people drove the pigs to the mountains to eat. The wood is hard and hard to deform. Especially unlike other tree species, the wood core is also hard. The stump is very suitable for cutting into the vegetable pier, so it is a good material for making furniture. However, our country's eucalyptus is now tall and stout. In the past, a fire in the Greater Xing'an Mountains lost a lot of eucalyptus and red pine. Now there are few timber forests and basically banned. The quality of eucalyptus wood currently on the market can be divided into red oak and white oak, most of which are imported from the United States at very high prices. Therefore, the real beech furniture on the market is expensive and belongs to high-end furniture.

Uv Coated Pet Film /Uv Treated Pet Film

Property: anti UV and anti aging 

Specification: 12mic-200mic  other spec can be customized

surface  : UV coating

Application: suitable for lamination for protective surface etc

Item

Unit

Index

Test condition

Thickness tolerance

%

≤3

GB/T6682-2001

Transmittance

%

≥75

GB/T 2410-2008

Tensile strength

 

MD

Mpa

≥170

GB/T 1040.3

TD

Mpa

≥170

Elongation at

Break

MD

%

≥90

GB/T 1040.3

TD

≥90

Heat shrinkage (150℃30min)

MD

%

≤1.4

GB/T 16958-2008

TD

≤0.2

Haze

%

1.7

GB/T 2410-2008

Electricity intensity

75um

V/um

≥105

GB/T 12802.2-2004

 



polyester film thickness


UV Coated PET Film

Uv Treated Polyester Film,Coated Pet Film,Uv Coated Pet Film,Uv Treated Pet Film

Shijiazhuang dadao Packaging materials Co , https://www.ddplasticfilm.com