Discussion on the performance of TOYOTA JAT710 air jet loom

JAT710 as the best-selling air-jet loom has been widely loved by users all over the world. With the development of a restless society, customer requirements are also becoming more diversified and more advanced. Toyota has newly developed JAT710 based on JAT610 to improve its technical content.

JAT710 inherits the concept of JAT610 (production of high-quality fabrics at low cost), and it is more outstanding in the basic performance of high speed, low vibration and energy saving. At the same time, in order to adapt to the development of modern factories, JAT710 is equipped with many of the most advanced electronic control technology. Moreover, the use of a new color multi-function operating panel that can be connected to the Internet will have great potential for development as a new generation of loom.

The new JAT710 air jet loom has new improvements in weft insertion and beating movements, and uses a new structure of heald frame, which reduces gas consumption by 20% and shock absorption by 30%, and the running speed can reach 1250r / min.
The JAT710 air jet loom was developed and produced by Toyota Dingye Group and sold to Europe, North and South America, and Africa through Suhex (CH) like L5400 loom. The loom is equipped with the latest IT functions for factory management. The powerful CPU, the function board based on the web browser and the newly developed TMS (Toyota Surveillance System) not only allow users to collect data through a single PC, such as the shift report of each loom, but also can realize multiple loom Two-way communication between the two, as well as network connections inside and outside the company. By connecting the JAT710 loom to the network through a standard local area network, and installing the performance test software of Toyota, users can easily introduce high-performance network functions into the factory. Its main features are as follows:
-Detection function: Through the PC, the operator can browse the data information, such as the predicted value of the output, efficiency and let-off amount of each loom;
-Two-way communication between looms: the operator can detect data information such as output and efficiency, and can browse the settings of other looms and adjust them through the function board of a loom;
--Two-way communication inside and outside the network: Through connection with the Internet, the operator can communicate with users in different places through the "JAT710" function board.

Five advantages:

1. The motion mode of each heald frame can be set freely through the multi-function operation panel.

2. Each heald frame can freely set different up and down angles.

3. The closing time can be set for each heald frame .

4. Even if 16 heald frames are used, there will be no restriction of unbalanced fabric.

5. The heald frame can be woven separately.