1. The installation of the liquid level gauge must be vertical to ensure that the float assembly can move up and down freely in the main tube.
2. There is no permissible magnet near the main body of the liquid level gauge, otherwise it will directly affect the work of the liquid level gauge.
3. After the liquid level gauge is installed, it needs to be calibrated with magnetic steel to guide the turning column once so that the display below the zero position is red and the display above the zero position is white.
4. When the liquid level gauge is put into operation, first open the lower diversion pipe valve to allow the liquid medium to enter the main pipe smoothly. Shanghai Yunou avoids the rapid rise of the liquid medium with the floating ball assembly, which may cause the failure of the column turning and disorder. If this phenomenon occurs, the magnetic steel can be used to recalibrate after the liquid level is stable.
5. In order not to damage the float assembly during transportation, the float assembly is taken out of the main tube of the level gauge before leaving the factory. After the level gauge is installed, the bottom sewage flange is opened and the float assembly is reinstalled. Into the main pipe, pay attention to the heavy end of the float assembly, can not be flipped. If the float assembly has been installed in the main pipe at the factory, in order to ensure that it has been transported
In the process, the floating ball assembly is not damaged. We use a soft card to fix the floating ball assembly in the main tube. As long as the soft card is pulled out during installation.
Stroller Sun Shade,Sun Shade For Stroller,Baby Stroller Sun Shade,Double Stroller Sun Shade
DongGuan Baby-Plus baby ware Co., Ltd. , https://www.baby-plus.com