Softball Field Soil Site Construction Process
When it comes to constructing softball fields, the process can draw from the construction techniques used for baseball stadiums within the IBO Network. However, it's important to note that the dimensions of a softball field may vary depending on the competition rules and the specific group—men’s, women’s, adult, or youth. To ensure maximum usability, the field should ideally be built to the largest standard size. Otherwise, smaller fields may limit the types of competitions that can be held.
One of the most critical aspects of building a dirt softball field is proper compaction. Each layer of soil must be compacted according to the design specifications. After leveling, a roller compactor should be used to achieve optimal density. It's crucial to avoid rolling when the ground is too dry or overly wet, as both conditions can compromise the quality of the surface. Frothing, or excessive moisture, should also be avoided during this stage.
If the field is being constructed for competitive use, it should be completed in one continuous effort rather than in multiple sections. This helps prevent uneven compaction caused by cross-rolling. The rollers should move from one end of the infield to the opposite side, ensuring even pressure. Once the rolling is done, the equipment should be positioned horizontally. Rolling in a back-and-forth motion creates a vertical cross-rolling pattern, which enhances uniformity. For flatness control, a 5m x 5m grid system is recommended throughout the entire construction process—it is the most effective method for measuring sports surfaces.
The top layer of the dirt field should consist of artificially treated soil. A common method involves sintering the soil, then crushing and screening it before mixing with sand, clay, and other materials. Depending on the intended use, additives such as salt, curing agents, or stabilizers may be incorporated. The mix ratio should be determined through testing, with salt content typically kept around 10%. It’s essential to conduct experiments to find the best combination. Recently, some venues have tried using colored materials in the soil to enhance visual appeal, but this practice is discouraged. Such colorants can stain athletes' clothing and, in severe cases, cause discoloration of their skin. This is not allowed in official competitions due to hygiene and safety concerns.
Corn fiber non-woven fabric (PLA non-woven fabric) is especially suitable for diaper, has a large amount of urine absorption, is easy to use, clean and hygienic, does not irritate the skin, and can reduce urinary rash, skin damage or dermatitis, and has low cost.
PLA corn fiber spunlace nonwoven
1) Renewability of raw material sources, fully biodegradable
2) The surface of the fiber is weakly acidic, similar to the pH value of human skin.
3) have a certain bacteriostatic effect
4) Good odor removal function
5) Good resistance to ultraviolet radiation
6) Non-flammable performance
7) Used for diaper, sanitary napkin, pad surface, absorbent bacteriostatic wipes and wipes, mask, semi-durable bedding
Biodegradable Diapers,Biodegradable Disposable Diapers,Honest Diapers Biodegradable,Environmentally Friendly Disposable Diapers
Shaoxing Greenstar New Material Co.,Ltd , https://www.greenstarpackage.com