Patent name: A two-roll automatic separation mechanism patent application number: 00215046.8 Publication number: 2434135
Abstract: The utility model provides a technical scheme of a two-roller automatic separation mechanism. The program mainly includes a bottom shell, an upper cover, and a paper feed channel. A paper separation roller is arranged on the bottom shell, a gear is fixedly connected on the output shaft, and two pressure paper shrapnels are arranged on both ends of the separation roller. The feature of this solution is that there is a bracket composed of two bracket side plates and a bracket cross plate at the rear of the separation roller, and the bracket shaft is mounted on the upper cover. A torsion spring is mounted on the support shaft, and a free-separated paper-dispensing small rubber roller is installed between the two bracket side plates. The outer cylinder surface of the separation roller is in close contact with the outer cylinder surface of the separation roller, and the contact point is located at the front end of the entrance of the paper feeding channel.