Product Name :Automatic Linear Liquid Filling Machine
Product Model :RG6T-6G
Product introduction: The automatic linear liquid filling machine is a fully automatic piston filling machine. The machine - dt21jx uses the up and down movement of the cylinder to drive the piston in the corresponding material cylinder to reciprocate, so that the material cylinder The cavity generates negative pressure and the valve stroke controls the stroke of the cylinder to adjust the filling volume so as to achieve an accurate filling effect. The fully automatic filling machine is based on the reference of similar foreign products and has been redesigned and added some additional functions. Make the product more simple and convenient in terms of operation, cleanliness, installation adjustment, equipment cleaning, maintenance and other aspects.
Scope of application: The juice filling machine is easy to operate and easy to use. It is widely used for automatic filling of liquids with different viscosities, such as food, medicine, chemical industry, daily chemicals, drinks, edible oil and other industries. Automatic filling machine is mainly used in lotion, care solution, oral liquid, skin care solution, disinfectant, liquid foundation, antifreeze, shampoo, hair care solution, hand soap, eye lotion, nutrient solution, injection, pesticide , medicine, cleansing, shower gel, perfume, edible oil filling machine, milk, juice, beverage, lubricating oil, and liquid filling in special industries.
Filling machine http://
Oil filling machine http://
Shower gel filling machine http://
Soy sauce and vinegar filling machine http://
Packaging machine http://
Shrink machine http://
Sealing machine http://
Baler http://
Cosmetics liquid filling machine application
Features:
A. The liquid filling machine is based on the reference of similar foreign products for improved design and added some additional functions.
B. It is more simple and convenient to use the product in the operation, accuracy error, installation adjustment, equipment cleaning, maintenance and other aspects.
C. The machine is compact and reasonable in design, simple and beautiful in appearance, and easy to adjust filling volume.
D. The machine has six filling heads, driven by six cylinders, and the filling materials are more rapid and accurate.
E. The pneumatic components of Germany FESTO, Taiwan AirTac and Taiwan Delta's electronic control components have stable performance.
F, material contact parts are made of 316L stainless steel.
G. The filling machine adopts Korean photo-eye device, Taiwan PLC, touch screen, frequency converter and French electrical components.
H, convenient adjustment, no bottle filling, accurate filling quantity and counting function.
I. The use of anti-drip and drawing filling head, anti-high foam product filling and lifting system, positioning system to ensure the positioning of the bottle and liquid level control system.
Technical Parameters:
Filling head
6 head type
Electric current
3A
power supply
220/110V 50/60Hz
power
500W
Pressure
0.4-0.6MPa
Filling accuracy
≦±1%
Filling speed
60-100 bottles/min
Optional models
5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml
Maintenance and care:
1. Always keep the equipment clean, especially for the electric appliances on the electric panel, to prevent moisture and dust, and it is forbidden to change the program of the inverter and program controller at will.
2. The power supply voltage should be stable, not exceeding ±15%, the material temperature should be maintained at 10°C ~ 40°C, the ambient temperature should be maintained at 5°C ~ 40°C, and the temperature should be maintained at 5 ~ 95% PH.
3. The flowmeter used by this machine is a precision instrument. Therefore, the oil must be filtered before it can be filled.
4. Turn off the power supply and oil inlet valve after completing the work.
5. Pay attention to the cleanness of the infrared sensor. Clean it regularly with clean cotton. It is forbidden that any object is close to the sensor during the work process. Do not have strong light directly or reflect to the sensor, otherwise it will prosper.
6. Add cylinder lubricants to pneumatic triplets on a regular basis.
7. When the machine is not used for a long period of time, wipe all parts clean and cover the dust with plastic or tarpaulin.
Equipment Usage Notes:
1. The automatic filling machine should be cleaned and installed after use to prepare for the next use.
2. We must regularly inspect some mechanical parts and conduct regular inspections. Inspection parts include: worm gears, worm gears, bolts on lubrication blocks, bearings, and other moving parts, to see if these parts are flexible and wearable, and defects should be promptly repaired.
3, automatic filling machine should be selected dry and clean indoor use, try not to use in the atmosphere contains acids and other places that are corrosive to the body's gas circulation.
4. If the drum flicks before and after work, adjust the screw on the front bearing to the proper position. If the gear shaft is falsified, adjust the screws on the back of the bearing frame to appropriate positions. Adjust the clearance to prevent the bearing from generating noise. The hand-turn pulley is suitable for tightness. Too tight or too loose can damage the machine.
5, if you do not use the packaging machine equipment for a long time, you must clean the whole body of the automatic lubricant filling machine. The smooth surface of the parts should be coated with anti-rust oil and covered with a cloth. If you do not use the device for a long time, you must check whether the various parts are normal before use. .