Use and maintenance of centrifuge

1. Before operating the centrifuge, the power supply should be cut off and the brake of the centrifuge should be released first. You can try to rotate the drum by hand to see if there is any bite.

2. Check for looseness and abnormality in other parts.

3. Turn on the power and start in a clockwise direction (usually it takes about 40-60 seconds from standstill to normal operation). Generally, each equipment must be run empty for about 3 hours after arriving at the factory, and it can work without abnormal conditions.

4. The materials should be placed as evenly as possible, and must be operated by dedicated personnel, and the capacity must not exceed the rated amount.

5. It is strictly forbidden to run the machine at overspeed, so as not to affect the service life of the machine.

6. After the machine is started, if there is any abnormal situation, it must be stopped and checked, and if necessary, it must be disassembled and repaired.

7. The centrifuge is running at high speed, so you should not touch the drum with your body to prevent accidents.

8. The mesh of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise it will affect the separation effect. In addition, the filter cloth should be installed when the filter cloth is installed.

9. The sealing ring is embedded in the sealing groove of the drum to prevent the material from running in.

10. In order to ensure the normal operation of the centrifuge, please refuel and maintain the rotating parts every 6 months. At the same time, check the running lubrication at the bearing for wear and tear; if the parts in the brake device are worn, replace them seriously; if there is any oil leakage in the bearing cover.

11. After the machine is used, it should be cleaned to keep the machine tidy.

12. Do not separate non-corrosion-proof centrifuges from highly corrosive materials; in addition, operate in strict accordance with equipment requirements and regulations. Non-explosion-proof centrifuges must not be used in flammable or explosive situations.

Makeup Blush

Blush Set,Makeup Blush,Waterproof Blush,Blush Color Palette

Zhejiang Laizhen Biotechnology Co., Ltd. , https://www.laizhen-bio.com